1.can be adapted on site to the exact length of the construction joint 2.serrated surface 3.permanent seal after injection Advantages:1.Can be adapted on site to the exact length of the construction joint(recommended maximum length is 6 metres)2.Serrated surface3.Permanent seal after injection4.Injection can be performed at any chosen time5.The system allows injection under relatively low pressure6.When injection tube is injected the pressure of dispersion of the resin remains uniform over the full length of the tube Field of application:Sealing of cold and construction joints, pipe penetrations, joints between slurry walls and slabs through post-injection of the tube with LW injection resins  Technology data:

property	Value
Outside diameter	10mm, 12mm, 30mm
Inside diameter	6mm
Maximum length	6m
Operating temperature	Up to 70°C

 Apperance:Yellow spiral shaped injection tube, porous its entir length, with an outside diameter of 12mm1. A reinforced spiral of steel wire2. A non-woven filtrating membrane3. Outer synthetic membrane Packaging:Length: 5x6m lengths( recommended maximum length is 6m)Blue or white trumpets: 10piecesAnchoring clips: 100pieces( can also be ordered seperately) Weight:Gross:4.18kg/30m Net: 3.8kg/30m