Solar safety light specification 

1. Solar Panel: 3.5V/78mA, high efficient monocrystalline silicon solar panel.

2. Battery: Ni-MH, 2.4V/600mAH, High temperature-resistant.

3. Output power: Maximum 3V/50mA, Minimum 1.8V/30mA

4. Light Source: using 4 red φ5 red standard LED

                            mixture with reflector in the middle.

5. Light Mode: Flash: double side with 180times/Min.or Constant lighting model .You can press the switch to choose lighting model .

6. Running time: flashing lighting model can work for 100 hours after full charge ;constant lighting model can work for 50 hours after full charge .

7. Charge time: In the normal sunny day, can be charged fully about 8 hours.AC power charge about  4 hours will full .

8. Switch control to turn on/off and lighting model .

9. Material: Housing is transparent PC.

13. Dimension: Length:100mm, Width:83mm, thickness:26mm.

14. Weight: about 180g.

10. Using Temperature Range (Degrees): -20°C~+80°C.

11. Storage Temperature Range (Degrees): -20°C~+40°C.

12. Waterproof: Waterproof when being soaked.

15. Compressive Strength: over 20 tons.

16. Visible Distance: More than 500 meters.

17. life time: 5 years

18. Easy to install,1 pcs maker with 50g plaster(resinA/B liquor 1:1) stick to ground, or with the screw to attach.

traffic safety signal light ,amber warning light ,solar safety blinker