Ads by Google
This controller adopt the Japan MITSUBISH PLC as control core, adopting the human-computer interface control operation, adopting step-motor as positioning control. simple operation, easy to use, accurate positioning, welding effect is good.
Technical parameter
Display size 5.7 inch
Display power 8W
Display voltage DC24V
Control voltage 220V
Solenoid valve voltage DC24V
Input voltage 380V+zero line
Environmental temperature 0-40°C
Cooling method water cooling + wind cooling
Model | DN-16 | DN-25 | DN-40 | D(T)N-63 | D(T)N-80 | D(T)N-100 | D(T)N-150 | D(T)N-200 | ||
Nominal power (S5) ( corresponding duty cycle 5%) | kVA | 16 | 25 | 40 | 63 | 80 | 100 | 150 | 200 | |
Mains input (U1) | V | 1~ 50HZ 380±10 V | ||||||||
Subprime no-load voltage (U20) | V | 3.45 | 4.04 | 5.27 | 6.78 | 7.30 | 7.91 | 9.50 | 11.87 | |
50% For the power load rate (S50) | kVA | 5.0 | 7.8 | 12.5 | 19.8 | 25.1 | 31.5 | 47.2 | 63.0 | |
100%For the power load rate (SP) | kVA | 3.5 | 5.5 | 8.9 | 14.0 | 17.8 | 22.3 | 33.5 | 44.7 | |
Max. subprime short circuit current (I2CC) ( corresponding duty cycle 1%) | A | 9000 | 11500 | 15500 | 18000 | 20000 | 22000 | 30000 | 35000 | |
Continuous output current (I2P) | A | 1010 | 1360 | 1680 | 2060 | 2430 | 2820 | 3520 | 3760 | |
Arm length | mm | 190*350 | 190*350 | 230*400 | 230*400 | 210*400 | 210*400 | 260*450 | 260*450 | |
Max. pressure | N | 2500 | 2500 | 3900 | 3900 | 6100 | 6100 | 10000 | 10000 | |
Stroke | mm | 50 | 50 | 50 | 50 | 50 | 50 | 80 | 80 | |
Welding thickness | mm | 2+2 | 2.5+2.5 | 3+3 | 3.5+3.5 | 4+4 | 4.5+4.5 | 5+5 | 6+6 | |
door Sheet edgefold double-end automation spot welding machine