220V high power wireless remote control switch KL-K150 1. Wireless high power controller 2.Operating Voltage: AC220V

220V high power wireless remote control switch KL-K150

Specification

1. Working Voltage: AC220V

2.Quiescent Current: 15mA(AC input)3.Receiving frequency: 266MHZ-433MHZ

4.Receiving sensitivity: -95dB

5.Encoding type: Fixed code

6.Encoding way: by soldering

7.Working mode: Nonlock, interlocking, self-locking.

8.Maximum load:50A (AC&DC Output)

9.Size: 52*75mm

Working model:

1)      self lock model

Press remote button A first time, the receiver relay is on, press button A again ,the receiver relay is off, the same as B/C/D.

Extend function:

(When jumper is off position) press A on the transmitter, receiver A goes on 2seconds,then goes off automatically…….same of B/C/D.

2)      non lock model

Press remote button A always , the receiver relay is on, release button A, the receiver relay is off, the same as B/C/D.

3)      interlock model

Press remote button A, the receiver relay A is on, the relay B/C/D is off.

Press remote button B, the receiver relay B is on, the relay A/C/D is off.

Press remote button C, the receiver relay C is on, the relay A/B/D is off

Press remote button D, the receiver relay D is on, the relay A/B/C is off.