Ads by Google
1. General
The PZ-J16 Unit has 16 relay outputs which are either pulse output or the self-retain output. In the pulse type, the relay contact closes for seconds and then automatically releases. In the self-retain type, the relay output remains closed or open on a long-term basis. The unit is connected to the upper computer through an RS485 bus to perform its intended control functions.
.
2. Norms
IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-5 IEC61000-4-6 EN55011 | (EN61000-4-2) (EN61000-4-3) (EN61000-4-4) (EN61000-4-5) (EN61000-4-6) | Personnel Electrostatic Discharge Immunity Testing and measurement techniques - Radiated Electrical fast transient burst immunity test Combination wave and surge impulse test Measurement Uncertainty In Immunity Test Measuring radiated emissions |
3. Technical Feature
Feature | Value | |
Output | 16 Signals | 16 relay outputs |
Relay capacity | 5A/250vAC or 5A/30vDC | |
Mode | pulse or self-retain | |
Power Supply | Voltage range | 24VDC (18~36VDC); AC/DC 80-270V (Order special) |
Consumption | ≤ 5W | |
Communication | Bus Mode | 2-wires half-duplex RS485/Modbus protocol |
Bus Capacity | ≤ 32 | |
Response Time | 20ms | |
Baud rate | 9600 / 4800 / 2400 / 1200 bps | |
Capacity of Sequence of Events (SOE) | ≤1600 | |
Others | Degree of Protection | IP40, Terminal IP20 |
Isolation | 2Kv/1min,50Hz ( inputs, output and supplier) | |
Work Temperature | -5°C - 55°C | |
Storage Temperature | -25°C - 85°C | |
Mounting | TS35 Standard DIN rail | |
Dimension | 160 × 50 ×110mm | |
4.1 Size: 160 × 50 ×110mm (L*W*H)