Ads by Google
Car Key Remote Control Duplicator, Copy Code Remote Control
It is designed with small size, beautiful exterior , Sound wave resonator (SAW) is used for stabilizing frequency.High stability and durable. it can copy fixed or learning code remote control by face to face.
Specifiction:
Frequency | 315Mhz/ 433Mhz/ 868Mhz/ others |
Frequency deviate | ±150KHz |
Copy the chip
| A.Common code: Learning code (1527, 2240, HT6P20B, HT6P20D etc.) |
Fixed code (2260, 2262, 2264, 2272 etc.) | |
Voltage | 6V |
Frequency Modulation | AM / FM |
Package | Plastic bag or small box (according to your requirement) |
Working Temperature: | -50°C~+80°C |
Use range | Alarm system, Home appliances, Industrial application, Automatic system. Car Key |
Application Scope:
Widely used for controlling electric doors/gates and windows ,garages door and all kinds of openers, gate barrier ,access control system, industrial control, car remote control, car alarm system, remote control switches , intelligent control, communication and security fields etc.
Our Service:
1) Your inquiry will be replied within 12 hours
2) OEM&ODM are provided
3) Keep your ideas and all related information confidential
4) Delivery by air mail or ship according to your request
Copy Code Remote Control Operating Instructions:
1.Delete the original code
(A) Press the lock and unlock button at the same time for 2 seconds, the LED will flash and extinguish immediately
(B) Keep pressing the lock button, and release the unlock button, and then press the unlock button for 3 times within 3 seconds. When the LED flashes quickly, the code has been deleted.
(C) Press any button, the LED will not flash immediately, that means the code has be deleted completely.
2.Copy the Remote Face to Face
(A) Press the same button of the both remotes at the same time for 3 seconds, the LED will flash quickly, that means the code of this button has been learnt.
(B) Do the same operation for the other 3 buttons. It can even learn different code remote (same frequency) to one copy remote.
Attention: during the learning, please make two remotes as close as possible, press the button of the remote to be copied a little longer to make sure the code has been learnt successfully.
Adjust the frequency:
If the frequency is 433.92Mhz, then copy operation can be done directly. If it is not this frequency, please adjust the frequency to what you want by noninductive screw, and then copy. The frequency can be adjusted from 280Mhz to 490Mhz. If the remote is with metal parts, then adjust 3Mhz lower to delete the influence to the frequency by the metal part, for example, adjust 315Mhz to 312Mhz, 433Mhz to 431Mhz. The frequency will be 315Mhz or 433Mhz after the assembling.