* Bypass timer / time delay * Ideal for "winterstart" kits * Knob adjustable time delay from 10-1000 seconds

Time delay ,  time relay, bypass timer

•QD-175 Knob adjustable from 10-1,000 seconds

 • Ideal for "winterstart" kits

 

   

 Installation

   1.Disconnect power. 2.Connect terminals as shown in the wiring diagram below. 3.Select the desired time delay. 4.Reapply power, check operation.    Specification   Input Line Voltage: 18-240 VAC Line Frequency: 50/60 HZ Output Output Ratings: Maximum: 1 amps Minimum: 40 mA Inrush: 10 amps Time Delay: 10-1,000 seconds    Mode of Operation   When power is applied to the input, regardless of the state of the pressure switch, the load is energized and timing begins. After the timing delay is complete, the pressure switch will control the load. The control is reset by removing power during or after the time delay.  Timing Diagram    For replaces:  

Mars	Supco	ICM
• 32395	• TDP68	175