Ads by Google
LT2 Thermal Overload Relays/electrical relay
The thermal relays LT2-K/Exx series are devices designed for protection of induction motors from overload or overthear.They are mounted to contactors LT 1 K/Dxx series and an operating circuit for motor control is passed through their NC contacts.The operation of these devices is based on the curving of bimetal plates mounted in the themal relay caused by the current passing through them. When the current to the consumer gets higher due to failure,the thermal current gets higher which leads to additional curvig of the bimetal phates and at getting above the limit value for the plate it pushes the breaking mechanism and breaks the operating circuit.The choice of a suitable protection prevents motor;s operation at unusal temperature conditions and guarantess maximum constant operaion.increases the effectivness and prolongs the tem of exploitaton| Functions |
| Switching off afternating current consumers at current overloadmaking of control systems for consumers used as a protective operating element in control panels of induction motors remarkable with high reliability of current characteristics |
| Technical Data |
Rated operating voltage:up to 690V AC: 50/60Hz Rated operating current range:up to 690V ACinsulation voltage:>690VJoining terminal:screw terminalCoting:flexible or rigid conductors with or without cable teminal for joining to the consumer to the contactor through the relay terminals the connecting terminals with the consumer can be adjusted according to the type of the contactorElectrical wear resistance(number of cycles):≥ 1000000 Mechanical wear resistance(number of cycles): ≥ 10000000Indication for protection activatingPossibility for choice of the protecton restoring (through the blue button)Possibility for range adjustment of the protection activatingPossibility for operation at higher frequencyMounting:mounting to the contactor:to the terminals of the contactor as it is additonally clammped to its frame through a pin mounting position :vertical gradient-maximum ±5° Plastic:wear resistance of UV rays and non-flammable(self-extinguishing material)Ambient temperature: -10oC~+60 oCInstallation altitude:up to 2000mNote:To protect the consumer from short circuit,before the combination contactor-thermal relay,a suitably measured breaker or safety device should be mounted... |
LR2 electrical thermal relay