1. Aluminum housing ,outer rotor motor 2. Temperature:0'C; 3. Fin space: 4.5mm; 4. Electrical defrost,high quality 5.Freon

Product features

1.     Iron  housing is in plastic-sprayed coat or rolled,  best in corrosion protection, beautiful in shape.

2.      Original coil arrangement to reduce the side resistance. The aluminum fins are fastened to the steel tubes by hydraulic expanding way, which is effective to reduce thermal contact resistance and improve thermal transfer.

3.      After pressure test, wash with trichlorethylene to clean oil dirt, moisture, oxide and other impurities inside. As such, no blocking trouble after filling refrigerant in use.

4.      Special fan motor, which is low in power consumption, large in air volume, low in noise, and far in air throw, guarantees good performance in humidity and low temp.

5.      Equipped with U-shaped electro-thermal tube that's good-in insulation inside the coil, rational gap arrangement and power ability to achieve defrosting performance.

6.      Groove-type channel clip, easy to install.

7.      Filled with nitrogen before leaving factory.

8.      KF-type chiller cooling capacity indicates : T library = 0'C Δ T=7'C,library fin space is 4.5 mm .

Feature technical parameter 

 

Model

Compressor horse power (HP)

Capacity ∧T=7°C (W)

Evaporator areas (m²)

Power (W)

Fan(380V) (220V)

Melts frost electric heat pipe (220v)

Into the liquid (mm)

Back to steam (mm)

GW (Kg)

Air-volume (m3/h)

Diameter (mm)

Range (m)

Coil pipe (Kw)

Water pan (Kw)

DL-2.1/10

1

2100

10

80

1x2270

300

8

1x0.9

0.9

12

19

26

  

Installation dimension

Model	A	B	C	D	E	F	E1	E2	E3	Drain (size)
DL-2.1/10	740	400	460	270	530	100	/	/	/	3/4″

Commercial Air Cooler for Saving Eggs and Vegetables