Overview of pyrolysis plant
Each set of equipment are composed by ten parts:
a. main engine horizontal type revolving split processor.
b. Horizontal-fixed distillation Processor.
c. Feeding-in system.
d. Tapping system.
e. Central electrically controlled system.
f. Condensation system.
g. Every oil refining systems.
h. fuel gas heating system (waste gas processing system).
i. Waste water processing system.
The two keys of pyrolysis plant are reactor and cooling system.
Reactor directly decides the machine's safety and service life. It is made by welded steel plate. So the quality of welding will have a direct impact on safety and service life. Therefore, we use automatic welding machine, X rays detection and heating treatment which will not only guarantee the quality of welding but also greatly improve working efficiency.
For cooling systems, there are two steps. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one small pipe. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 40 square meters, which will guarantee you a high oil yield.
Long service life:
1.Material: Q345R special steel plate ,thickness 14mm.
2. Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.
3. The service life of the reactor will be 8 -10 years
oil yield rate:
Oil yied/day | Used tyres,scrap tyres | Big truck tyres | 45%--50% | |
Car tyres | 40% | |||
Bicycles and motorcycles tyres | 30%--35% | |||
Waste plastics | Fishing net,Safety net, farm-oriented film | 45%--50% | ||
Conwenient bags , weave bags | 40% | |||
Off –cut of recycled paper mill | 20%--30% |