256 IP in, 4 Mux, 4 adjacent carriers out each module 1U with 3 modules NMS management

Outline

DX324T IP Mux and modulation module is the latest generation mux-modulating all-in-one device. The modular design of this device makes each of its daughter cards stand-alone when operating. Each daughter card can receive the UDP format TS through GE port, and support up to 256 different IP address or port number. It’s like the all-in-one device combined with 4 multiplexers, (256 channels inputs) and 4 DVB-T modulators, which can output adjacent channel RF carrier (40M~960M) through the two RF output interfaces. Additionally, 1U chassis supports up to 3 modules (256 channels mux-modulation) while the 4U chassis supports up to 12 modules (1024 channels mux-modulation). This DX324T IP Mux and modulating module has excellent integrated level, powerful performance and low cost, which is especially adequate for the new generation IP CATV system. 

Features

Dual power supply

1 GE input, RJ45interface or SFP

Supports up to 256 channels TS over UDP, MPTS or SPTS

Supports unicast and multicast, supports IGMP v2\v3

Max 840Mbps for all input

Supports 4 channels MPEG2 re-multiplexing and MPTS/SPTS multiplexing

Supports accurate PCR adjusting

Supports PID filtering, remapping and PSI/SI editing

Supports up to 180 PIDS remapping per channel

4 adjacent DVB-T carriers output, compliant to ETSI EN300 744 standard

RF output frequency range: 40~960Mhz, 1Khz stepping

RF output level: -16~0dbm (per DVB-T carrier), 0.5db stepping

Excellent RF performance, MER≥40db

Support NMS/SNMP

Modular design,1U chassis support 3 modules , 4U chassis support 12 modules

Principle Chart

 

 

 

Specifications

 

Input	Interface	1GE(RJ45) or 1 SFP input port, hot backup
	Transport Protocol	TS over UDP, unicast and multicast, IGMP V2/V3
	Transmission Code	Max 840Mbps for all channels
MUX	Input Channel	256
	Output Channel	4
	Max PIDs	180 per channel
	Functions	PID remapping (auto/manually optional)
		PCR accurate adjusting
		PSI/SI table automatically generating
Modulation Parameters	Channel	4
	Modulation Standard	ETSI EN300 744
	Constellation	QPSK/16QAM/64QAM
	Trans mode	2K/4K/8K
	FEC	1/2,2/3,3/4,5/6,7/8
RF Output	Interface	2 F typed output port for 4 adjacent carriers, 50Ω impedance
	RF Range	40~960MHz, 1kHz stepping
	Output Level	-16~0dbm (per DVB-T carrier), 0.5db stepping
	MER	≥ 40dB
	ACL	-55 dBc
System	Network management software (NMS/SNMP) supporting
General	Demission (WxLxH)	630mmX440mmX44.5mm
	Weight	9kgs
	Temperature	0~45°C(operation),-20~80°C(storage)
	Power Supply	AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz
	Consumption	15.4W