Welcome to ECOL - Join Free - Sign In
12V Automatic Submersible Boat Bilge pump 750GPH
12V Automatic Submersible Boat Bilge pump 750GPH
Supplier Info
[China Supplier]
Contact Person : Mr. Gao Weijun
Tel : 86-21-58372708
Fax : 86-21-61925869
Product Detail
Voltage: 12V DC Flow capacity: 750 Gallons per hour Hose Outlet: 19mm (3/4") Approvals: CE 1. The SEAFLO submersible auto bilge pumps are equipped with built in electronic       controlled reed sensor system to make fully automatic operation easy. 2. No separate float switch is needed and relay loop design protect the pump against instant high current. 3. No power use until pump turns on when water rises.4. Auto Bilge Pumps are built with compact, efficient, long life motor, rust, ignition and    corrosion protected stainless steel shaft, and high-impact durable plastic housing. 5.Quick release strainer for easy maintenance. Product Description

 

This product is 100% brand new, and comes packed in original Seaflo™ boxCompact, automatic, fully submersible electric pumpBuilt-in float switch! (No separate float switch is needed)Equipped with built in electronic controlled reed sensor system for easy fully automatic operationNo power use until pump is activated by internal float switch (when water level rises)Compact, efficient, long life motorRustproof and corrosion resistantStainless steel shaftHigh-impact durable plastic housingQuick release strainer for easy maintenanceExtremely efficient, very low current draw and offer high capacity outputWater cooled long-life motorsIgnition protection to protect the pump against high currentWater/moisture tight sealsSilent and vibrationless operation Anti-air lock protectionWill not burn out when run dryIntegrated float switch TEST button at rear of unitCan be used with switch panel for manual overrideIncludes comprehensive user manual with installation instructions and wiring diagram

Specifications

Voltage: 12V DCFlow capacity: 750 Gallons per hour (2850 Litres per hour) - 47.5 Litres per minuteMax. delivery head: 3.8 metres (height of vertical water flow up pipe)Current draw: Only 3 Amp Hose Outlet: 19mm (3/4")Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05")3-wire lead, approx. 1m longApprovals: CE

Applications

Typically used in boat hulls / bilgesBait tanksPonds, pools, spasOther applications where you have to remove water fromNote: These pumps are designed for intermittent use only, NOT designed for continuous use 

12V Automatic Submersible Boat Bilge pump 750GPH

Related Products
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.