used blast hole drill rig,China used blast hole drill rig Manufacturers, Suppliers

DBCFG-Long screw piling driver

Feb 22, 2013

... as below:1 The drill machine used the long screw to dig the hole and can perfuse concrete ... into the holes bottom through the center of drill ... head device adopted speed reducer with large hole through the center and drove by double- ... as high efficiency and low strength of labor4 Drill rig adopts the combined way of consignment and shipment ...

Supplier: Hunan Deboom Heavy Industry Co., Ltd.

[China Manufacturers]

Drills AO-3500

Apr 19, 2012

Drills AO-3500 Drills AO-3500: Item NO:AO-3500Twist drill16mmHole drill12-35mmDrill depth50mmDrill modehandRated voltage110/230VRated frequency50/60HZRated input power1050WNo-load speed500r/minMax travel140mmRotated axis taperWeldon shank 3/4"N.W.17.3KGG.W.18.7KGPacking size31*16*44cm Drills AO-3500

Supplier: Zhejiang Weilishi Machine Co., Ltd.

[China Manufacturers]

550W Hinge Machine

Feb 09, 2012

... pcs spindle heads 4.max drill depth 102mm(4") ASAKI Electric Hinge MachineModel No.:AH100Multi-purpose Hole DrillTechnical Specifcation:Motor Power: 550W ...

Supplier: Nanhai Lihao Electric Works Co., Ltd.

[China Manufacturers]

Oil well rotary table

Apr 01, 2013

... capacity: 900 kN Introduction:Oil well rotary table for workover rig is well maintenance equipment for cement plug drilling, casing ... other down-hole operations in oilfield.ZP100 rotary table is mechanical type rotary table, which is used together with workover rig which has ... Small maintenance team can use this equipment to accomplish some drill rotary operations done by big maintenance team. It is ...

Supplier: Shandong Santian Linqu Petroleum Machinery Co., Ltd.

[China Manufacturers]

Eccentric Under reaming Bit Drilling Follow-up Casing

Apr 01, 2013

... hammer, eccentric underreaming bit and follow-up casing is used to effectively drill holes in complicated formation such as loose ground, crash ... holes, cement grouting holes, anchor wire holes, drainage holes, blast hole, underwater blast hole, trenchless guided drillinghole for underground pipe line and cable installation ...

Supplier: Wuxi Jinfan Drilling Equipment Co., Ltd.

[China Manufacturers]

water well drilling equipment

Feb 18, 2013

... drill rig,down the drill rig lUp tower tank:stand up tower lHoisting:raise the drill rig,down the drill rig lTurntable:drive the drilling pipe to drill lSquare hole ... : the drill pipe drill ...

Supplier: Zhengzhou Yihong Industrial Equipment Co., Ltd.

[China Manufacturers]

Oilfield Centrfugal Sand Pump

Nov 19, 2012

... .efficiency: 66% 5. motor power: 55kw Centrifugal sand pump used in drilling fluid solids control. Centrifugal sand pump is the ... mainly supplies to solids control circulating system of oilfield drill rig,and be used to provide drilling liquid with a certain discharge capacity ... pump. The TRSB4×3 centrifugal sand pump is usually used as clean water pump.Centrifugal sand pump is adopted advanced ...

Supplier: Xi'an Tianrui Petroleum Machinery Equipment Co., Ltd.

[China Manufacturers]

total station BTS-Tunnel serious BOFEI

Oct 27, 2012

... deflection and arch shape measurement, can also be used for large span structures such as factories, warehouses ... internal dimensions, the gauge measurements, used in highway, railway tunnel, water conservancy culvert clearance measurement ... tunnel measurement lofting problems, to complete data acquisition, blast hole layout, random detection main functions, design of input ...

Supplier: Beijing Gelinruida Technology Development Co., Ltd.

[China Manufacturers]

Partition Tempered glass

Aug 07, 2012

... 4)Edge:flat edge,grind edge,polished edge,bevelled edge5)Hole:drill work available at customers' optionCertification ISO9001:2000,CCC Packing ... injury by changing the break pattern. Tempered glass is used in applications where heat, mechanical strength and safety are ... when it shatters or breaks. Tempered glass is also used in fireplace doors, on masonry and prefabricated fireplaces equipped ...

Supplier: Jinan Friendship Glass Co., Ltd.

[China Manufacturers]

hydraulic oil cooler with small hydraulic motor

Mar 09, 2012

... application: construction machinery, such as excavator, vibratile roller, carlifter&drill rig Heat exchanger for the oil cooler: hydraulic oil cooler with ... Name Brand & Model No. Quantity Number of Year(s) Used Condition Punching Machine Lianxing, J-23 7 2.0 Acceptable ... Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition Water Testing Machine No Information 3 7.0 Acceptable ...

Supplier: Guangzhou Risen Machinery Co., Ltd.

[China Manufacturers]

Wholewin YK8 Machinery Throttle Control Lever

Jan 01, 2013

Throttle Control Lever Used for heavy duty machine Plywood package ISO9001:2000 certificate Delivery ... can be used with push-pull controls for many applications including transport vehicles , road roller,oil tanker,excavators ,hole drilling rig ,fire truck ...

Supplier: Yongkang Wholewin Control Cable Co., Ltd.

[China Manufacturers]

curved tempered glass with silk screen printing

Mar 31, 2013

... injury by changing the break pattern. Tempered glass is used in applications where heat, mechanical strength and safety are ... when it shatters or breaks. Tempered glass is also used in fireplace doors, on masonry and prefabricated fireplaces equipped ... 4)Edge:flat edge,grind edge,polished edge,bevelled edge5)Hole:drill work available at customers' optionCertification ISO9001:2000,CCC Packing ...

Supplier: Chuzhou Zhongbo Glass Technology Co., Ltd.

[China Manufacturers]

centrifugal diesel engine dredge sand pump

Mar 09, 2013

... to solids control circulating system of oilfield drill rig,and be used to provide drilling liquid with a certain ... 3000-meter-long drilling rigs,also can be used to supply mud to triplex mud pump as ... ;The SB4×3 centrifugal sand pump is usually used as measuring pump or replenishment pump;The SB3× ... 2 centrifugal sand pump is usually used as clean water pump.The Series Centrifugal Sand ...

Supplier: Puyang City Qili Petroleum Mechanical Equipment Co., Ltd.

[China Manufacturers]

high effciency vane air motor

Dec 27, 2012

... Conversion Device, which change pressure energy into mechanical energy, widely used in mining, oilfields, construction, metallurgy, paper making, medicine, chemistry smelting ... volume to adjust the rotary speed and power 351 down-hole drill.Vane air motor main technical datas: Work pressureMpaNo-load speedr ...

Supplier: Yantai Tashan Machinery Co., Ltd.

[China Manufacturers]

sanxin plywood construction template

Mar 31, 2013

... look, wooden or even marble.Conventional tools can be used to cut, drill, nail and glue this product. The shaping process ... material: paulowniaGrade:First-class.Colour: BlackApplication or usage:mainly used for construction of high-rise buildings high level bridge and ... performance is good. Performance and so on nail, saw, drill hole surpass the bamboo plywood, the small steel plate. May need ...

Supplier: Dongming Sanxin Wood Industry Co., Ltd.

[China Manufacturers]

Diamond Sintered finger bits for stock removal

Sep 11, 2012

... , is widely applied on stone surface milling and generally used after hole-drilling in stone tops processing. Bits are mostly driven ... are professional in producing polishing pads, cutting blade, core drill bits and stone processing machinery for more than 6 years ... in Fujian Province.2.Main productsPolishing Pads,Cutting Blade, Core Drill Bits, Diamond Cup wheel, Finger Bits, Stone Processing Machinery ...

Supplier: Fuzhou Yongyi Crafts Co., Limited

[China Manufacturers]

KT-368B Pneumatic Multi-head Drilling Machine

Nov 23, 2012

... with multiple heads,Triplet hole drill This equipment primarily is used for processing the through-hole or non-through-hole on the profiles of ... pack to the head of clip-drill and the multi-head drills station, making drill a hole more convenient.MAIN TECHNIQUE PARAMETER ... .1~0.2mm/r8.Max. drill and cut hole diameterΦ15mm(single hole)9.Min. drill and cut hole diameterΦ3mm10.Max. processing aluminum ...

Supplier: Shunde Kingtool Aluminium Door & Window Machinery Co., Ltd.

[China Manufacturers]

Hydraulic Holder

Apr 01, 2013

This Hydraulic Holder is used for small core drill rig.

Supplier: Wuxi Geotec Geological Equipment Co., Ltd.

[China Manufacturers]

Model FZQ Float Collar

Aug 08, 2012

... can not only lessen the load on the drill rig during running in the hole with casing, but also prevent the liquid from ...

Supplier: Shandong Dongbao Steel Pipe Co., Ltd.

[China Manufacturers]

VB-421A Woodworking multi boring machine

Oct 14, 2012

... steel with preheat Introduction: VB series boring machine is widely used in manufacturing panel furniture ,cabinet ,and other wood-based products ... able to turn between 45°-90° and equipped with multi-hole drill .Air flux can be adjusted freely to select a proper ... Total Number of Spindles11*4+21*2 Installation Dia of Drill Bit shaft10mm Total Power7.4kw Main Spindle Speed2840r.p.m ...

Supplier: Taizhou Ting Ting Woodworking Machinery Co., Ltd.

[China Manufacturers]