softening low temperature hot melt adhesive sheet,China softening low temperature hot melt adhesive sheet Manufacturers, Suppliers

Hot Melt Adhesive

May 20, 2012

... colorLow viscosityTECHNICAL PROPERTIESBrookfield Viscosity(ASTM D3236) R&B Softening Point(ASTM E28) About 2100 mPa.s160° ... original package at an average temperature of 25°C or below. Storage temperature should not exceed 35°CCLEAN ... MSDS, followed by a thorough purge with the adhesive itselfPACKAGINGAvailable in film wrapped block (about 1 ... and goggles when handling molten adhesive Hot Melt Adhesive

Supplier: Jiangsu JWC Machinery Co., Ltd.

[China Manufacturers]

Fisher-tropsch wax for hot melt adhesive

Aug 23, 2012

... synthetic wax.The advantage of Fisher-tropsch wax for hot melt adhesive:1.Directly through the CO and H2 synthesis, no ... the hot melt adhesive industry.2.The Fisher-tropsch wax is low viscosity in high temperature,it can improve the liquidity of hot melt adhesive,enhance ... high condensation point can raise the heat resistance of hot melt adhesive.4.It has small penetration,can improve the strength ...

Supplier: Henan Dongyang Wax Industry Co., Ltd.

[China Manufacturers]

Hot melt adhesive film for textile fabric

Dec 21, 2012

... non-woven, hot melt adhesive filmComposition: PEWidth: 40"-150CM(Max: 2M)Thickness: 0.05 - 2mmColor: translucentFeature: high water wash resistance, low melting viscosityApplication: ... -seam underwear, bonding of embroidery and non-woven fabrics.Low temperature and low pressure peeling(110°C-~130°C- about 5 min ... shrinking and shading.2012.12.12 Attn: Ms.Rosa Hot melt adhesive film for textile fabric

Supplier: Dongguan Jianxing Clothing Accessory Co., Ltd.

[China Manufacturers]

PO hot melt adhesive film

Jan 15, 2013

... 2)good bonding property 3)water-resistant This kind of hot melt adhesive film is suitable for embroider badge, trade mark, handicraft, ... Feel soft, have better bonding intensity to various fabrics, glued temperature is low, easy to use, can bear the laundry requirement. Type ... 0.25Breadth(cm): 47-100Melt Range(°C): 80±5°CPress-temperature(°C): 100-130degree celsiusTime(s): 10-15 Its appearance is ...

Supplier: Shenzhen Skywing Leather Gifts Co., Ltd.

[China Manufacturers]

Hot Melt Adhesive Double Sided Tape

Apr 17, 2012

1.hot melt double sided tape 2.thickness: 0.10mm 3.long term ... at low temperatureApplication:-Adhesion of aluminum nameplate, metal and plastic materials.-Computer-Cellular phones-Automobile Construction:-Adhesive-Nonwoven fabric-Adhesive-Release paper Hot Melt Adhesive Double ...

Supplier: Shenzhen Western Hemisphere Technology Co., Ltd.

[China Manufacturers]

Hot melt adhesive film

May 15, 2012

... or make logo on garment,by welding machine. Hot melt adhensive filmITEM:XT-708(Double side plastic film ... low melting point,after being heated up,especiall fit for material which needs be jointed by hot air but cant bear high temperature ... (80-100 ).This low-temperature film is affirmed by ... color of the film could be chosen. Hot melt adhesive film

Supplier: Fuzhou Xiangtai Trade Co., Ltd.

[China Manufacturers]

3M 3764 EVA Hot-melt Adhesive

Jul 21, 2012

... Flexible at low temperatures Application3M Scotch-Weld Hot Melt Adhesive 3764 bonds to many plastics. including polyolefins. Good impact resistance and flexibility at low temperature. Health ... and Safety InformationHot adhesive vapours ...

Supplier: Shenzhen Haigao Trading Co., Ltd.

[China Manufacturers]

hot melt adhesive

Mar 31, 2013

we supply hot melt adhesive for packing and book binding Hot melt adhesive for packing:fine hot tack,strong viscosity,rapid solidification,low glue,fine chemical resistance,temperature resistancem,hot stability ... carton box or paper caseHot melt adhesive for book binding:this kind of adhesive includes edge adhesive and back adhesive.they have milk-white and ...

Supplier: Jiaozuo Guangdeyi Industrial & Commercial Co., Ltd.

[China Manufacturers]

hot melt adhesive for bookbinding as back adhesive

May 18, 2012

... :Brookfield viscosity: 5900±500 cps/175°CR&b softening point:77±4°CWorking temperature:145 to 170°CEnvironment :non-toxic,lesspollutionGuarantee period ... :two year Storage: airiness, shade, drynessPackage:25 KGS/CTN hot melt adhesive for ...

Supplier: Guangdong Roger Chemical Technology Co., Ltd.

[China Manufacturers]

Pressure Sensitive Hot Melt Adhesive

Jun 15, 2012

... heat resistance Description:It is a High Viscosity Pressure Sensitive Hot Melt Adhesive. It exhibits a strong adhesion to a variety of surfaces ... Brookfield, Thermosel System) (MC07/ASTM D.3236) : 30000 ± 10000 cPs Softening point (R&B) (MC08/ASTM E.28) : 122 ± 10ºC ... in wheeler, roller, nozzle or other applicator system. Recommended working temperature: 160 – 180ºC Temperatures above 190ºC should be ...

Supplier: Beijing Yuanhang Shiing Building Materials Co., Ltd.

[China Manufacturers]

hot melt adhesive glue

Jan 04, 2013

... Hot melt adhesive glue 1. Excellent bonding strength2. for PVC/ ABS veneer to mid-dense fiberboard, particleboard, and plywood.high/medium/low temperature ... board, edge banding for fireproofing board.High temperature Appearance Light yellow or white grain Viscosity ( ... temperature, higher room temperature shorten the shelf life Spread 160 ~ 200 g/m² Water Content of Substrate 8% ~ 12% hot melt adhesive ...

Supplier: Jinan Fengshuo Decoration Material Co., Ltd.

[China Manufacturers]

RTB Series Hot Melt Adhesive Coating Machine

Nov 09, 2012

... low cost and less area needed. According to the requirements of different products, an optimized design used for RTB series hot melt adhesive coating ... station) 11.Melting speed: 200kg/m 12. Adhesive input pipe length:3m 13.Temperature: 210 degree 14. Installed power: about 70kw ... 15.Power: three phase 380v more or less 15%,50Hz 16.Adhesive ...

Supplier: Wenzhou Kingsun Machinery Industrial Co., Ltd.

[China Manufacturers]

Hot Melt Adhesive Applicator (Spiral Spraying Type) JZ-102A

May 24, 2012

... 2-10mm wide). It replaces double-side adhesive tapes, insoles JZ-102A Hot Melt Adhesive Applicator (Spiral Spraying Type)Application:This model ... 10mm wide)/spiral/steam shape. It replaces double-side adhesive tapes, as well as insole nailing. It is ... Temperature150~250Machine Dimensions350*370*470mm3Power800WNet Weight14kgGross Weight18kg Hot Melt Adhesive Applicator (Spiral Spraying Type) JZ-102A

Supplier: Dongguan Jiuzhou Machinery Co., Ltd.

[China Manufacturers]

Sell High Flexible Hot-Melt Adhesive Film

Mar 07, 2012

hot melt adhesive film apply to seamless garment (sew free garment use.) Model: TY-223Color: TransparentStructure makeup: polyurethane Softening point: 140°CWidth (mm): 0.08-0.10, 0.12-0.15Thickness Range (mm): 950Face Fabric Application: Nylon; Polyester; Non-woven fiber; CottonPacking: 50yds/roll Sell High Flexible Hot-Melt Adhesive Film

Supplier: Jiangmen Yetom Plastic Products Co., Ltd.

[China Manufacturers]

2013 hot sale Hot melt adhesive glue for mattress spring pocket

Feb 22, 2013

... a hacer nuestro mejor esfuerzo para ayudarleProduct: Hot melt glue or hot melt adhesive glue for mattress spring pocketFeature: 1.Light ... yellow transparent Solid 100%Molten Gardner5—6R&B Softening Point80°C±3 °C Brookfield Viscosity3600±200cps at160 ... ask us!hot melt adhesive glue, hot melt glue for mattress spring pocket, glue for mattress spring pocket 2013 hot sale Hot melt adhesive glue for ...

Supplier: Xiamen Transcend Tie & Fashion Co., Ltd.

[China Manufacturers]

C5 Hydrocarbon Resin for hot melt adhesive

Jul 22, 2012

YH-1288 is widely used into Hot Melt Adhesive. YH-1288 are petroleum resins suitable for hot-melting additives, (including quick packaging adhesives, book ... synthetic rubbers. They provide enhance performance in Hot Melt Adhesive applications.Feature of YH-1288 in Hot Melt Pressure Sensitive AdhesiveGood open time/set time ... with pallets for 1*20 FCL. C5 Hydrocarbon Resin for hot melt adhesive

Supplier: Ningbo Yonghua Resin Co., Ltd.

[China Manufacturers]

Hot melt adhesive film for embroidery patch

Mar 31, 2013

... T/T 3.Quality with SGS approved Hot melt adhesive film for embroidery patch Hot melt adhesive film was widely used in emblem, ... patches,textile,garments and electron field.As the hot melt adhesive film has strong stickability,we always used it ... -150cmlength100y/roll or customizedcolorwhite/milk whitemelting point107°CAdhering temperature(°C)130°CAdhering pressure(bar)2.0Fusing time15swashablevery ...

Supplier: Shenzhen Hengshenglong Plastic Products Co., Ltd.

[China Manufacturers]

Non-halogen flame-retardant hot melt adhesive film

Nov 06, 2012

... growth trend.Our production of halogen-free flame retardant hot melt adhesive film is one of the latest environment-friendly solvent ... -free natures of hot melt adhesive film. When the film was compounded on the fabric ... halogen flame-retardant hot melt adhesive films is good, and it is free from the effects of climate and temperature, while always ...

Supplier: Jiangyin Kangqi Trade Co., Ltd.

[China Manufacturers]

Hot Melt Adhesive (Polymer Tape) for Heat Sealing Pouch Cell Tabs

Jul 14, 2012

... W x 0.1mm Thickness) EQ-PLIB-HMA8 Hot Melt Adhesive (Polymer Tape) for Heat Sealing Pouch Cell ... x 0.1mm Thickness) EQ-PLIB-HMA8 This hot melt adhesive/sealant is specific and necessary item for sealing ... 3 Layers Lamination) Outside Layers (Both Sides) Thermal Softening Index 116ºC/ 3 Seconds/ 0.3Mpa/ 180 ... C (Reference only)Middle Layers (Both Sides) Thermal Softening Index 145ºC/ 3 Seconds/ 0.3Mpa/ 180 ...

Supplier: Shenzhen Kejing Star Technology Company Ltd.

[China Manufacturers]

PE Hot-melt Adhesive Heat Shrink Tube

Mar 31, 2013

... ;Raychem MWTM PE Hot-melt Adhesive Heat Shrink TubeModel: MHST/MHST-AResistant to UV-radiationHigh electrical insulationSuperior mechanical propertyMinimum fully recovery temperature: 120Standard color ...

Supplier: Shenzhen Dicore Technology Co., Ltd.

[China Manufacturers]