... directly. (3)Set intensity of every Laser 2X in interface (Fig 3) shows. the range is 1(weak)~3(strong). Operation ... .etc. (4)Setting work time Click “Time” to enter interface (Fig 4). click"←" and "→"one time to change one minute, click ... (1)Click the “Laser 4X” in interface (Fig 3) shows to enter interface (Fig 5).(2)The other steps please refer to ...
... of multi circuit excitation in the radial direction. As shown Fig 4. With regard to 6×19 round strand wire rope ... diagnosing system• 4..1 The structure of sensor• As shown Fig.5, 1 Location Encoder 2 Sensor mandrel 3 Main Fixed ... would decrease about5%.• 4.2 Working in site• As shown Fig.6, all we need do is two inspectors, and can ...
... .9. Loosen the cap of the Hall probe (see upper Fig).Place the effective position of Hall probe to touch on ... are ruptured you could connected it according to the right Fig. Such terminal 1,2 are current, No. 4 and No ...
... subdivision parameter to achieve automatic test. Data is recorded and preserved automaticly.Users could record according to the various automaticly generated ...
... years, fully retaining original aromas. By enabling products to be preserved for long periods without the need for refrigeration, Aluminum foil ...
... . 15 times physiology brine's absorbency 2. fluid can be preserved in paper. 3. quick absorbency and not turn yellow To ... than 15 timesl Super retain capability: the fluid can be preserved in paper after its absorbed. And its fluid-retain capability ...
... not removable.2. Cap the Ortho (Tandom) port (fig.C) & Accessory port (fig.D) for a good seal.3. Attach vacuum tubing ... to vacuum port (fig.B) attach patient tubing to patient port (fig.A).4. Check & test if you ...
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.