mold temperature conteroller,China mold temperature conteroller Manufacturers, Suppliers

HDJL variable pump injection molding machines

Feb 27, 2013

... 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication ... 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer ... with measuring device 9. Oil temperature controller 10. Oil bypass ...

Supplier: Ningbo Grand Machinery Co., Ltd.

[China Manufacturers]

universal 3D active shutter glasses from China

Mar 17, 2012

... transmissivity 90%,direct transmissivity15%ratio1.20g/m2 forming temperaureshrinkage rate mold temperature/230-320°Cpackage each one have an elegant packageforming shrinking ...

Supplier: Guangzhou Caibiao 3D Glasses Co., Ltd.

[China Manufacturers]

polyurethane systems for air filter

Jan 03, 2013

... recommending temperatureRecommended formula Component weightDLQ-ADLQ-B10030-50Reaction characteristics(Material temperature is 20) actual value varies depending on processi conditions Manual ... mixingHigh pressure machineCream time SGel time STack-free time SMold temperature Demould time min15-3040-6090-12040-504-68-1530-4560 ...

Supplier: Shandong Dongda Inov Polyurethane Co., Ltd.

[China Manufacturers]

Melamine Cyanurate for nylon

Feb 22, 2013

... which caters to current trend.MCA can reduce the surface temperature of the polymer material and isolate the air to block ... affects slightly to the machine capability. It seldom occur the mold stick, foaming and frosting phenomenon in the process, accretion is ... than 0.1%; prevent from reabsorbing moisture.3) Injection temperature is 240-260 , mold temperature is 60-70 , and injection pressure is 600 ...

Supplier: Shanghai Xusen Non-Halogen Smoke Suppressing Fire Retardants Co., Ltd.

[China Manufacturers]

PP raffia plastic granules

Mar 31, 2013

... : 0.901-0.92g/cm 33. Grade: Raffia Grade 6. Mold temperature: 160-220°CSpecification PropertyPP-202Unit of MeasureAppearanceGranule---Density0.92g/cm3MFR10 ...

Supplier: Shijiazhuang Changhang Import & Export Trading Co., Ltd.

[China Manufacturers]

Polyol and Isocynate Resin For shoe sole

Nov 19, 2012

... of Rise Time (s)Free Rise Foam Density(g/cm3)Mold Temperature(°C)Demold Time(min)Parameter40~45/38~42100/96~986 ...

Supplier: Xuchuan Chemical (Suzhou) Co., Ltd.

[China Manufacturers]

Bakelite powder

Mar 17, 2013

1.widely usage with competitive price 2.complete range of colors 3.Complies with European standard Type:PF2A4-161Color:Black, Colored SeriesCharacteristic and ApplicationThe product is made from Novolac resin, wood flour and minerals as filler affording good electric properties. It is recommended for the production of insulating structures of low-voltage electric appliances and household articles ...

Supplier: Liuzhou Winchem Trading Co., Ltd.

[China Manufacturers]

Amino Moulding Compound

Oct 06, 2012

... type, for compression, standard moulding conditions as follows:1) Mold temperature: 140-150° C 2) Molding pressure: 25-40MPa3) Curing ... type, for compression, standard moulding conditions as follows:1) Mold temperature: 145-155° C 2) Molding pressure: 25-40MPaUFMP, granule ... as follows:1) Mould temperature: 135-140°C 2) Feeder Nozzle temperature: 70-85° C3) Feeder temperature: 60-70°C4) Pressure ...

Supplier: Hangzhou Uniwise Import & Export Co., Ltd.

[China Manufacturers]

High performance PPS

Jan 19, 2013

... .0020.0020.0020.002ProcessConditionsInjection Temperature-°C290~330290~330290~330290~330290~330Mold Temperature-°C120~150120~150120~150120~150120~150* MD: Mold direction; TD: Transverse ...

Supplier: Chenguang Fluoro & Silicone Polymer Co., Ltd.

[China Manufacturers]

corn starch resin

Mar 10, 2013

... Max Moisture (%) 0.2Middle Temperature (°C) 160 to 170 deg.CFront Temperature (°F) 140 to 150 deg.CNozzle Temperature (°C) 170 to 180 ... deg.CProcessing (Melt) Temp (°C) 160 to 165 deg.CMold Temperature (°C) 10 to 15 deg.CSpecific Instructions for Moulding of ... be used as the last cleaning step, after which the temperature can be adjusted to the correct settings.Other CommentsPrintability of ...

Supplier: Biograde (Nanjing) Pty Limited

[China Manufacturers]

JK-15 Antifreezing Concrete Admixture

Mar 31, 2013

... can accelerate cement hydration and concrete hardening under the low temperature condition, enhance the early strength greatly and make the strong ... or blow the winds excessively caused the crack. Entering the mold temperature control above 5 °C degree.2. Required heating curing at ... damage. The intensity will remain enhancing rapidly, when the ambient temperature increasing.

Supplier: Beijing Jiankai Concrete Admixture Co., Ltd.

[China Manufacturers]

Television injection mould

May 22, 2012

... gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and ... with mould Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer ... need to quench mold with high surface hardness and ...

Supplier: Taizhou Huangyan Ningguang Mould Co., Ltd.

[China Manufacturers]

ZH8060 core shooter / shooting machine/machinery(cold and hot)

Apr 01, 2013

1.PLC programmable control 2.staff table 3.mold temperature automatic control 4.OEM ZH8060 core shooter / shooting machine/machinery( ... adjustable technics parameters,staff table(incording to user requirements)3.mold temperature automatic control,according to user requirements with access to car ...

Supplier: Qingdao Binhai Jincheng Foundry Machinery Co., Ltd.

[China Manufacturers]

water chiller

Jan 13, 2013

chiller: water chiller, air chiller, cool tower,hopper dryer,compressor,mold temperature,crusher,low speed crusher Chiller : from ningbo jinde company, have ...

Supplier: Ningbo Jinde S&T Co., Ltd.

[China Manufacturers]

Automatic Lead-acid battery Grid Casting Machine

Feb 01, 2012

... class/classes.2. mold grid: according to grid drawings design provided by users.3. lead-melting furnace temperature control: temperature control adjustable: ... -500°c, the working range of±10°c.4.grid mold temperature control: on the mode: 120-170°c, under the ... short- circuit heating, heating power 6kw.6. lead spoon temperature control: temperature control: 450-550°c. Automatic Lead-acid battery Grid ...

Supplier: Nantong Zhenhuan Trade Co., Ltd.

[China Manufacturers]

90mm rubber extruder machine

Apr 01, 2013

... Vacuum pump: 1.5 kw Capacity:4m3/min 3-7 Mold temperature controller Circulation pump Heating zone Cooling zoneElectromagnetic valve: 3-8 ...

Supplier: Taizhou Zhuochuang Industry And Trading Co., Ltd.

[China Manufacturers]

Electrode forming machine

Mar 29, 2012

... 99.99%. Hammer inspection is not needed.5. DRO for mold temperature6. Vacuum degree of the vacuum system can surpass -0 ...

Supplier: Shenyang Mountain Machinery Import & Export Co., Ltd.

[China Manufacturers]

different style of high gloss plastic LCD /LED TV concrete injection mould

Mar 28, 2013

... gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and ... with mould Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer ... need to quench mold with high surface hardness and ...

Supplier: Taizhou Huangyan Geyee Mould Co., Ltd.

[China Manufacturers]

Aluminum Alloy Mini baking pan

Jan 16, 2013

... , non-stick; Easy use and clean* Suitable for cake mold / chocolate mold / candy mold*Temperature: -40F to +446F(-40c to +230c) Description NameAluminum alloy ... , non-stick; Easy use and clean* Suitable for cake mold / chocolate mold / jelly mold* Temperature: -40F to +446F (-40c to +230c).Design available Different ...

Supplier: Beijing Decorations Bakeware Co., Ltd.

[China Manufacturers]

metal parts cabinet

Feb 11, 2013

... , offices, a variety of small parts, hardware tools, machine parts, mold parts, electronic components, materials, stationery and other use of storage ... proportion:1.05g/m³,shrinkage factor:0.6%-0.8%.Mold temperature:170-250°C2.what is ABS material?ABS is a ... .05g/m³,shrinkage factor:0.4%-0.7%.Mold temperature:200-240°C, dry temperature:80-90°C. Plastic drawer : The PS The ...

Supplier: Ningbo Gangdao Office Furniture Co., Ltd.

[China Manufacturers]