fellowes c 120,China fellowes c 120 Manufacturers, Suppliers

Rubber Additive DCP(Crosslinking Agent)

Sep 08, 2012

... , and other organic solvents. Sublimable in high vacuum. Decomposing temp(º C) 120º C Specific gravity D204 1.0481 Active Oxygen content(%) 5.8 ... Half-life period 180º C 1min 135º C 1hour 116º C 10hoursUsage 1. Dicumyl Peroxide (DCP) is as initiator ... , 20kg/carton box, 50kg/fiber drum 2. Stored below 30º C, keep from direct sunbeam and violent shaking during transportation. 3 ...

Supplier: Liuyang Sanji Chemical Trade Co., Ltd.

[China Manufacturers]

Zinc Oxide Desulfurization Adsorbent, Catalyst

Feb 26, 2012

... operation results both at higher ( about 400°C) and lower (about 200°c) temperature.Composition and Physical Properties Appearancewhite or ... loss on abrasion, %max6Breakthrough sulfur capacity, %min20(220°C)min30(350°C)Normal Operation Condition Feedstock: light oil, residue cracking ... speed: 30-50°C/h from room temperature to 120°C, 120°C for 2 h, 50°C/h over 120°C until required temperature is ...

Supplier: Pingxiang Hualian Chemical Ceramic Co., Ltd.

[China Manufacturers]

C5 hydrocarbon resin used for rubber, adhesive

Nov 07, 2012

... Softening point: 90 (80Deg. C ~90Deg. C), 100 (90Deg. C ~100Deg. C), 110 (100Deg. C ~110Deg. C), 120 (110Deg. C ~120Deg. C)Colour(Gardner 50% Toluene): ... 5 #, 6#, 7#, 8#. Density(25 Deg. C ... max0.3Ash Content(%): max0.1MELT VISCOSITY (200Deg. C): 600~1000.THIS TPYE RESINS CAN USED TO ...

Supplier: Puyang Jiahua Chemical Co., Ltd.

[China Manufacturers]

Magnetic Stirrers85-2

Jan 29, 2013

... control Major technical parameter: Model 85-2 Max.operation temperature(°C) 120 Heating power(W) 350 The scope of temperature adjust(r ...

Supplier: Beijing Zhongxing Weiye Instrument Co., Ltd.

[China Manufacturers]

Carbamide lab Spray Drying machine LPG-5

Feb 11, 2013

... Temperature range of inlet air 30°C~280°Cl Temperature range of outlet air 30°C~120°Cl Temperature precision ±1°Cl Speed ...

Supplier: Nanjing SF Chemical Equipment Co., Ltd.

[China Manufacturers]

Plastic Mold Temperature Controller

Aug 06, 2012

... to control the temperature, keeping the error within ±0.1°C, keeping long time constant temperature, high efficiency and energy saving ... pipePT1/2PT3/4Max.Working temp. (°C)120140160Min. working temp. (°C)Inlet temp. +3~5°CTemp. control accuracy(°C)-0.1~+0.1°CHot ...

Supplier: Dongguan Topstar Machinery Technology Co., Ltd.

[China Manufacturers]

low power consumption Corn dryer machinery

Jan 18, 2013

... moisture decreased(%)4~16Heat mediumClean airHot blast temperature(°C)< 120Max temperature of grain(°C)55Unevenness of drying(%)< 2Percertage of broken grain(%)< 0 ...

Supplier: Zhengzhou Taida Mining And Metallurgy Equipment Co., Ltd.

[China Manufacturers]

Plate Compactor

Apr 14, 2012

... , Robin and Lifan Model: VB-N50 ,VB-N60 ,C-77 ,C-90,C-100, C-120, RC-1 Main Technical ParameterModelVB-N50VB-N60C-77C-90C ...

Supplier: Ningbo Yinzhou Chuangxin Construction Machinery Co., Ltd.

[China Manufacturers]

Polyamide Resin

Feb 14, 2013

... fields.2). Specification:Appearance: pale yellow, transparent solidSoftening point(°C): 110±5Color (Fe-co) : 7 maxAcid value(mgKOH/g ... ): 5 maxAmine value(mgKOH/g): 5 maxFreezing poing(°C): 7 maxProperty: good stability.3). Application:Gravure printing ink ... film domain.2). Specification:Appearance: pale yellow, transparent solidSoftening point(°C): 120±5Color (Fe-co) : 7 maxAcid value(mgKOH/g): ...

Supplier: Qingdao Sanhuan Colorchem Co., Ltd.

[China Manufacturers]

BLUME Instantly Hair Straightening Cream

Mar 29, 2012

... trimming;2. Determine hair quality; mix lotion A with lotion C evenly according to proportion in the following table, then keep ... after softening, turn the temperature of ionic splint to 160°C-180°C(120°C-160°Cfor damaged hair), divide hair into a lot ... rinse with warm water;6. Take proper amount of lotion C and smear evenly on hair, then massage in about 2 ...

Supplier: Guangzhou Baiyun District Kaqi Daily Cosmetics Factory

[China Manufacturers]

Full dull color masterbatch

Mar 31, 2013

... masterbatch for 8-10 hours under the condition of 105°C-120°C before use, the suggested dosage is 4%-9%, avoid sun ...

Supplier: Poly Plastic Masterbatch (Suzhou) Co., Ltd.

[China Manufacturers]

straw yellow high chlorinated polyethylene (HCPE)

Jan 21, 2013

... used as the anti-corrosion coatings, container coatings, the road c We supply high chlorinated polyethylene resin is mainly produce the ... (s) with 4 cup (20% 2 °C solution 25) 30 to 60 thermal decomposition temperature (°C) : 128 (%) ash in more than 0 ... %)≥65 66.2Volatile (wt %)≤0.50 0.32Thermal decomposition temperature(°C)≥120 ——Viscosity(S) 20% xylene solution, 25 °C20—40 28Ash (wt ...

Supplier: Puyang Tiancheng Chemical Co., Ltd.

[China Manufacturers]

High quality CBZ-Val-OSU-OH,CAS:3496-11-5

May 04, 2012

... ,etc..Test ItemsStandardAppearanceWhite crystalline powderIR SpectrumIn accordance with structureMelting Point110°C-120°CFree Animo Acids≤0.2%Loss on drying≤1.0 ...

Supplier: Nantong Desheng Chemical Co., Ltd.

[China Manufacturers]

one- off new tableware environmental Biodegradable cups

Dec 18, 2012

... . 2. Water & Oil resistant 3. Microwave and refrigerator safe (-15°C~+120°C) 4. Variety of sizes, shapes and uses are available5. Feature ... . 2. Water & Oil resistant 3. Microwave and refrigerator safe (-15°C~+120°C) 4. Variety of sizes, shapes and uses are available5. Feature ...

Supplier: Huaibei Foreign Trade Develop Corp.

[China Manufacturers]

perforated aluminum composite panel

Mar 12, 2013

... .0N/mm11.2N/mmQualifiedTemperature allowance20 cycles without change from -20°C to 80°CUnchangedQualifiedHeat deformation temperature≥95°C120°CQualifiedCoefficient of heat ...

Supplier: Bazhou Julong Panel Industry Co., Ltd.

[China Manufacturers]

T803B Poly-alpha-olefin(PAO) pour point depressant

Mar 24, 2012

... . Technical data ItemTypical valueTest methodAppearanceOrange transparentvisual inspectionFlash point (open cup) °C≥120GB/T267Kinematic viscosity,mm2/SMeasuredGB/T265Ash content, % ≤0.20GB/T268Effective ... constituent, % ≥30SH/T0034pour point depression effect,°C ≥16GB/T510Water content % ≤0.03GB/T260Shear stability index(SSI)report ...

Supplier: Daqing High-Tech Industrial Development Zone Linqiang Petroleum & Additive Product Co., Ltd.

[China Manufacturers]

QLB40 asphalt mixer

Mar 31, 2013

... )oil5463.5104.5125157.5coal7586.5127.5155205Finished product silo volume5t5t9t9t9tDischarge temperature(.C)120-1800C(adjustable)Fuel consumption oil:5-7.5kg/t,coal ...

Supplier: Fujian Lianfeng Machinery Co., Ltd.

[China Manufacturers]

High performance PPS

Jan 19, 2013

PPS HAVE: Excellent chemical resistance tight tolerance better thermal performance dimensional stable flame retardan Property Test MethodUnitsFiberglass ReinforcedP130TP130T-04P140TP140T-02P140T-04PhysicalDensityISO 1183g/cm31.561.561.651.651.65Water AbsorptionISO 62%0.020.020.020.020.02MD/TD* -%0.4/0.70.4/0.70.3/0.60.3/0.60.3/0.6MechanicalTensile StrengthISO 527MPa150145185180175Elongation at ...

Supplier: Chenguang Fluoro & Silicone Polymer Co., Ltd.

[China Manufacturers]

Zinc stearate

Mar 31, 2013

1. non- toxic 2.good lubrcants and stablizers 3.used on plastics and rubber 4.we are manufacture Zinc Stearate1.Molecular formula: Zn(OCOC17H35)22.Characters and Uses: They are white, fine powder, insoluble in water. .3.Specifications:Zn content,%10.3-11.3Free Fatty Acid(As Stearic acid)% ≤1.0Moisture,% ≤1.0Melting Point, °C120±5Fineness(thr 200 mesh),% ≥99.5 4. Applicaitons: they are widely used ...

Supplier: Shengzhou Light Industry Plastic Chemical Factory

[China Manufacturers]

Chlorinated Polyvinyl Chloride (CPVC) for cpvc Pipe

Apr 18, 2012

... powderVolatilization %0.290.2930 mesh sieve rate%9999Thermal decomposition temperature 　°C ≥120120Density(g/cm³)1.45-1.581.45-1.58Tensiles ...

Supplier: Hebei Jingxin Chemical Group Co., Ltd.

[China Manufacturers]