... use Φ20 (1Cr18Ni9Ti) or anti-corrosion occasions with PTFE (or F46) manufacturing.Float ball for the Φ120 (1Cr18Ni9Ti) is Stainless steel ... for the use of teflon corrosion occasion (or F46) protective layer. Plastic float diameter Φ140, buoys is Φ100. DXYK ...
... , Al/plastic compound film, XLPE insulation, PVC insulation, F46 insulation, F46 sheath This product is used as signal transmission and connection ... XLPE insulated: 90oC b) PE and PVC insulated: 70oC c) F46 insulated: 200oC 3) Min. laying temperature: a) PVC sheathed cable ... : ≥0oC b) F46 sheathed cable: ≥-60oC 4) Min. bending radius: non-armored cable ...
Rated voltage U0 / U 500V (450/750V) and under control, monitor and protect the loop line cable. All kinds of control cable1.PVC insulated control cable TypeDenominationKVVPVC insulated and sheathed control cableKVVPPVC insulated and sheathed braid shield control cableKVVP2PVC insulated and sheathed Cu tape armored shield control cableKVVP3PVC insulated and sheathed aluminum tape armored shield ...
It coated with FEP(F46)resin on one side(FH) or doub sides(FHF) through the sintering process at high temperature. It coated with FEP(F46)resin on one side(FH) or doub sides(FHF) through the sintering process at high temperature. Polyimide FEP Film
The grains is made from the second grade brown aluminum oxide lumps. Normally used in blasting or polishing application. AF-10CThe grains of this type is broken up by rolling mill and made from the second grade brown aluminum oxide lumps. Normally used in blasting or polishing application. such as rust removing. lacquer, kicking off, etc. Usually we call it brown aluminum second grade sand. ...
Suitable for two chlorine different cyanogen uric acid sodium, three chlorine different cyanogen uric acid and so on Summary of the products Dry powder roller pigeonhole granulator whether our company absorb foreign advanced powder body build grains of technology and practical new-type powder body that develop do law make a grain of equipment. This machine is reasonable in design, the structure ...
Black Silicon Carbide for Sandblasting and Abrasives: 1. for refractory,polishing,abrasives 2. high purity 3.fast delievery Black Silicon Carbide for Sandblasting and Abrasives:1. brief introduction:Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw materials. Its hardness is between fused alumina and ...
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.