Taiyang Thermal Positive CTP plate

1. Sensitivity: 120-140mJ/cm(mJ/cmvaries based on platesetter manufacturer)

2. Resolution: 1%-99% at 200lpi. Dependent upon capability of imaging device

3. Run length: 50,000 impressions unbaked, 200,000 impressions baked.(Run length depends on exposure energy, processing and printing quality controls and conditions)

4. Developer: Taiyang, Kodak or Agfa developer

5. Developing conditions: Developing temperature: 23°C-28°C,time: 25-35 seconds. Newly produced developer can be used for 30-35 seconds at 23°C.With the aging of developer, developing temperature should be raised, but better not extend developing time. For newly produced developer, it can have shorter developing time with higher temperature, such as 25°C for 30 seconds, but better not higher than 30°C.

6. Packaging: Available in all standard formats, including bulk packaging options.

7. Transport and Storage: Store plates flat in their packaging between 10°C ~ 30°C, away from excessive cold, heat, high humidity and direct sunlight, with RH between 40% - 65%.

Good Compatibility Thermal CTP Plate