Jacketed Glass Reactor 30L
Video of jacket/jacked glass reactor: http://v.youku.com/v_show/id_XMzkyNzE1Njg4.html
This jacketed glass reactor can be used to do high temperature experiment(max temperature is 250°C),as well as low temperature experiment(min temperature is -60°C) and vacuum tests.It is an ideal equipment for modern chemistry small and medium-sized experiment,bio-pharmaceuticals and new materials synthesis.
Furthermore,the design of this reactor is unique,which can guarantee experiments of more convenient and safer.
The structure of the 30L jacketed glass reactor:
Detail structure and information:
About the sealing of the stirring rod,it is titanium alloy mechanical sealing,which is more stability,and the rusting is disappearance.There is a fluororubber seal between titanium alloy circle and PTFE.Each glass reactor must through the strict tests before leaving factory,the sealing performance is 0.098Mpa.
The core part is the glass reactor body.Our glass reactor is made of GG3.3 high boron silicon glass,it is double glass design,inner into reaction menstruum do stirring reaction,interlayer can be passed different kinds of liquid (such as hot water,hot oil or cryoprotectants) to do cycle heating or cooling reaction.Setting thermostat conditions,it can be used in require atmospheric or negative pressure conditions to conducte stirring response and do reaction solution reflux and distillation.
Furthermore,the warranty for our glass reactor body is one year,dear customer could use it with no anxiety.
If the liquid you poul into the glass reactor is dangerous,such as strong acid and alkali,you could choose the safety insulation cover,which cost is USD78.
About the discharge port,we use aluminium ring flange for fixing.There is no dead corner in the container,so it is easy to outlet the reaction material.
If you need pump vacuum and heat liquid that circulate in the interlayer,you could choose other two equipments: water circulating vacuum pump and high temperature circulator.
The complete plant of the jacketed glass reactor:
Operating principle:
1 The inner layer is used to inject reaction material.
2 The constant temperature fluid,which be injectted in the jacketed glass,can be replaced by hot solution or cooling liquid,to do cycle heating or cooling reaction.
3 The reaction material can be stirred by stirring rod.
4 The reaction process happened in the vessel.
5 The evaporation and backflow of reaction material can be controlled.
6 When the reaction is completed,the reaction material can be released from the discharge port,which is in the bottom of the reactor.The operation is quite convenient.
Features:
1 All of the glass adopts Pyrex,which can ensure good chemical and physical properties.
2 If hot oil cycles through the jacketed glass,heating experiments could be done.On the contrary,low temperature experiments can be done if the circulated fluid is cold.
3 The heat of reaction could be taken away quickly through water,which cycling in the jacketed glass.
4 Large mouth design makes it easy to clean,standard mouth makes the assembly and backflow could be chose.
5 It can be used as distillation syntheses device.
6 Titanium alloy mechanical sealing.So the sealing is more stability,the stirring is more evenly,the rusting is disappearance.There is a fluororubber seal between titanium alloy circle and PTFE.Each glass reactor must through the strict tests before leaving factory,the sealing performance is 0.098Mpa.
7 The temperature is measured by PT100 electronic.
8 LCD display makes it is easier and more convenient to measure temperature.
Technical Details:
Model | BK-30L | BK-50L | BK-100L | |
Power | 90W(gear motor) | 120W(gear motor) | 200W(gear motor) | |
Stirring speed | 20~600 r/min | |||
Material capacity | 30L | 50L | 100L | |
Inside and Outside Glass Cylinder Diameter | 315/360mm | 360/405mm | 460/500mm | |
Dimension | 61*41*190cm | 100*105*240cm | 118*110*250cm | |
Packing Size | 167*55*62 cm | 172*55*62 cm | 198*67*74 cm | |
96*52*59 cm | ||||
Packing Weight | 91 kg | 136 kg |
| |
Power supply (V/Hz) | 220V/110V, 50Hz/60Hz |
Jacketed Glass Reactor 30L