Polypropylene PP random copolymer/PPR homopolymer,random copolymer, impact block copolymer

Polypropylene

Virgin PP resin Granules/Pellet

Grade:

PP block copolymer :: Injection moulding, PP block copolymer :: Pipe extrusion, PP block copolymer :: Sheet extrusion, PP block copolymer FLOWPACT :: Injection moulding, PP controlled morphology CLEARPACT :: Injection moulding, PP controlled morphology CLEARPACT :: Thermoforming, PP high crystallinity :: Automotive injection moulding, PP homopolymer :: Bi-axially oriented film, PP homopolymer :: Cast film, PP homopolymer :: Fibre, filament and tape extrusion, PP homopolymer :: Healthcare, PP homopolymer :: Injection moulding, PP homopolymer :: Pipe extrusion, PP homopolymer :: Thermoforming, PP Homopolymer FLOWPACT :: Injection moulding, PP impact :: Automotive injection moulding, PP random :: Automotive injection moulding, PP random copolymer :: Blow moulding, PP random copolymer :: Cast film, PP random copolymer :: Healthcare, PP random copolymer :: Injection moulding, PP random copolymer :: Sheet extrusion, PP random copolymer QRYSTAL :: Injection moulding, PP super high impact :: Automotive injection moulding

Application: Exterior application, Houseware & appliances ,Caps & closures, Crates & boxes, Thin wall packaging, Bottles & cans, Cast PP film, Under the bonnet application, Thin wall packaging, woven bag, BOPP film, Sheet Sewage Waste water pipe, Tapes & strapping, Containers & pails

ITEM	Unite	Value	Test Method
Cleanliness	piece/kg <=	0-5	GB 12670
Melt Mass-Flow Rate (MFR, 2.16kg)	g/10 min	2.0(+-0.35)	GB/T 3682
Tensile Strength at Yield	MPa	32.8	ASTM D638
Bending modulus	GPa >=	1.4	MA 17074
Outrigger impact strength(23°C)	J/m >=	29.4	MA 17027
Isotacticity	%(m/m)>=	94.5	MA 15763
Ash	%(m/m) <=	0.01	MA 15681
Vicat softening point	°C >=	130	MA 17018
Chlorine content	%(m/m)<=	0.005	MA 15794
Fish-eye 0.8mm	Piece/1520cm2<=	0-1.0	MA 17108
Fish-eye 0.4mm	Piece/1520cm2<=	0-10	MA 17108
Yellowness index	<=	4	MA 19037

Leo

Polypropylene PP random copolymer/PPR