It can be declared for CCS, ABS, GL, BV, KR, RINA, DNV and other marine products inspection certification.

1. when electric network is power off, it can automatically start the diesel generator in 40 seconds and automaticallyswitch on for power supply.2. When diesel generators supplys, if the electric network load exceeds 90% of unit capacity, it will automaticallystart a stand by diesel generator, and automatically adjust and switch on, so as to achieve Dual parallel generatingpower.3. When electric network loads more than 95% of total capacity, it will unload non-essential load automatically after1 minute delay (time adjustable).4. In Dual Parallel run of diesel generators, if electric network load is less than 40% of power plant capacity, the latter parallel load units automatically transfer and splitting, off from the electric network.5. Heavy load inquiry function: Inquiry is necessary before starting large capacity heavy load, calculated by theautomatic station. If the power plant capacity allows, then starting command issues; if the power plant capacity islow and as isolated operating, diesel generator will be started automatically. Large-capacity load is only allowed tostart after staring commend is issued by the auto-power station, so as to ensure that power will not overload trip dueto starting large power generator.6. Automatically self-check function7. Extend alarm function as required by AUTO-O specification.8. Important load start in turn.9. with a standard RS485 or RS232 external control interface.The management module adopts SELCO, SIGMA and other famous brands, so as to achieve automaticfrequency modulation, ensuring continuity of the swith board.

The main switchboard