tension composite insulator Test report by WHVRI XIHARI 5000 Hours aging test by CEPRI ISO9001:2008. IEC61109

Suspension/Tension Composite Insulator used for 10-110kV power transmission lines

Electromechanical specifications:

 1).Rating voltage: 10-110kV 2).Specialized mechanical bending load:70kN

3).Structure height: 400±5mm4).Min arcing distance:230mm5).Min creepage distance: 630mm

6).Lightning impulse voltage: 110kV7).Power frequency wet withstand voltage: 40kV

Features:1) End fittings are crimped onto fiberglass rod with voice-operated displacement type crimper2) The connection location between end fittings & rods is fused with sheds housing by the overall high temperature vulcanized silicone rubber injection molding as it could minimize the interface.

3) Composite insualtor

Materials: 1) Silicone Rubber housing 2) ECR fiberglass reinforced epoxy resin rod

10-110kV Vertical Line Suspension Electrical Power Composite Insulator