Welcome to ECOL - Join Free - Sign In
Gas Hose for Home Appliance
Gas Hose for Home Appliance
Supplier Info
[China Supplier]
Contact Person : Mr. Aero Sun
Tel : 86-21-58383658
Fax : 86-21-58385636
Product Detail
Gas Hose for Home Appliance-gas connector-metal hose

Gas Hose for Home Appliance-gas connector-metal hose

Gas hose for home appliance is especially applied to the connection between cooking appliance and gas valve at the end of gas transmitting pipe, being the new product for daily life use developed by Aerosun Corporation, Shanghai Branch, which surely sees promising marketing prospect. Owning the advantages of anti-corrosion, good sealing, nice appearance, long using duration and convenient installation& disconnection, and high flexibility, it can greatly avoid the occurrences of aging, leakage, toxicosis and explosion etc., which usually arise from the use of rubber hoses.

 Specification:

Item No.

DN

Thread Type

Seal Type

RQ-08-SM18X1.5-G1/2

DN08

One end Female M18X1.5; one end Female G1/2.

Two ends flat-sealed by rubber gaskets.

RQ-08-SG1/2-C9.5

DN08

One end Insert φ12mm(I.D); one end Female G1/2.

One end insert-sealed by rubber gasket, one end flat-sealed by rubber gasket.

RQ-08-C9.5

DN08

Two ends Insert  φ12mm(I.D).

Two ends insert-sealed by rubber gasket.

RQ-08-SG1/2

DN08

Two ends Female G1/2.

Two ends flat-sealed by rubber gaskets.

RQ-10-SG1/2

DN10

Two ends Female G1/2.

Two ends flat-sealed by rubber gaskets.

 Characteristics:1.Anti-aging,taint-resistant:SUS304/SUS316L;2.Safety guarantee:insurance covered by PICC;3.Quality guarantee:ISO9001 certification;4.Cautery-resistant:SUSS304,HP59 copper with chrome plate;5.Flexibility:annular corrugation,it can be bent at any direction 10 times upon large than the minimum bend radius;6.Inspection department:china Gas Appliances inspection Center;7.Reputation:Superior product Recommended by Shanghai Gas Appliances Management Department.Installation Instruction:1.Select applicable type and length;2.Put the nuts on hose in advance before installation and make sure rubber gaskets in the ports are all right;3.Turm off gas switch before installation;4.When turning the nuts ,try to avoid any violence ,which may destroy the rubber gaskes;5.Using soap water to check whether there is a leakage after installation;6.Special design and manufacture can be done according to client's requirement. 

Gas Hose for Home Appliance

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.