PTFE tube, ID: 1mm~150mm, Wall thickness: 0.5mm~5mm, The specification can be customized according to your requirements.

ptfe tube  PUSHING various performance indicators(  ptfe tube ).

After ten year’s effort, Jiangyin Jiangnan Fluoroplastic Co.,Ltd had successfully produced larger size PTFE dispersion resin paste extruding tubes in 2010, which were never been manufactured since the establishing of the company. Single length of pipes sized atφ1 and φ150 are from 8 m ~ 15m. The normal production of paste extruding tubes of this type is significant, compared with previous producing process that many other factories make pipe formation by winding method and then process to produce waved hoses. Meanwhile products sized atφ80 and φ100 were formally started up to be produced at June 20th, 2006 at Jiangyin Jiangnan Fluoroplastic Co.,Ltd.

 PTFE Tube:

1.Flat and tidy surface2. no defects 3.no crevices and separations.4.Low minimum order quantity;

PTFE is the most chemical-resistant of all knownPlastics. It Has the best electrical properties of plastics.

ptfe tube Applications insulating cover for conductor, pipe for corrosive fluids

ptfe tube

1  Proportion                    G / cc                  2.12.32  Tensile strength              Kg / sq cm               ≥2003  Elongation                     %                           ≥2504  Impact Strength               Cm x kg / sq cm          ≥135 Brandt's strength              kg / sq cm              4.546 Thermal Conductivity           Kcal / m x hours °c           0.217 Linear expansion coefficient   Cm / cm / °c    

                             -100°c                    1.09 x 10-4                             -50~0°c                  1.13 x 10-4                             0~50°c                   1.23 x 10-4                             50~100°c                1.14 x 10-4                             100~150°c              1.365 x 10-4                             150~200°c                1.69 x 10-4                             200~250°c               2.165 x 10-48 Volume resistivity         Ohm x cm                   ≥10179 Surface Resistivity        Ohm                        ≥101410 Permittivity 1000000 Week                                  1.82.211 Kok dielectric loss tangent 1000000 Week             ≤2.5 x 10-412 Flammability                                          Unburning 13 Climate-related resistance                             Good 14 D.C. voltage strength  KV / mm (46) micron       ≥60

ptfe tube  can be used at the temperature of -180 to +260°C. It has the lowest frictional factor and the best anti-corrosive property among the known plastic materials. It is used as insulating covers for conductors and pipes for corrosive fluids, and applied in the automotive, electrical, industrial and appliance markets.

ptfe tube  Technical data:

Item		Density(g/cm3)	Tensile strength(Mpa)	Breaking elongation(%)
Target	Molding pipes	2.10~2.30	≥25	≥380
	PTFE tube	2.10~2.30	≥25	≥380

ptfe tube  production flow chart

 ptfe tube-wire knitting machine

  warehouse-PTFE tube    

  

office building

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v74/533303497_1/Large_diameter_PTFE_tube.jpg' , 'http://i01.i.aliimg.com/photo/v74/533303497_2/Large_diameter_PTFE_tube.jpg' , 'http://i01.i.aliimg.com/photo/v74/533303497_3/Large_diameter_PTFE_tube.jpg' , 'http://i01.i.aliimg.com/photo/v74/533303497_4/Large_diameter_PTFE_tube.jpg' , 'http://i01.i.aliimg.com/photo/v74/533303497_5/Large_diameter_PTFE_tube.jpg' , 'http://i01.i.aliimg.com/photo/v74/533303497_6/Large_diameter_PTFE_tube.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Large-diameter PTFE tube

Verified Information This information is Verified by Bureau Veritas and is valid for the following period: 2013/03/25 --- 2014/03/25 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity: Product line name Production Line Capacity Actual Units Produced(Previous Year)

PTFE Tube and Fittings	USD 12,000,000 / Year	confidential

Export Market Distribution: Market Revenue(Previous Year) Total Revenue (%)

Mid East	confidential	15.0
Eastern Asia	confidential	10.0
South Asia	confidential	10.0
Domestic Market	confidential	65.0

Production Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Terminal assembling machine	Not provided	3	1.0	Acceptable
Drilling machine	Not provided	1	3.0	Acceptable
Lathe	Not provided	2	3.0	Acceptable
Milling machine	Not provided	1	2.0	Acceptable
Drawing and flanging machine	Not provided	2	2.0	Acceptable
Fritting machine	Not provided	8	1.0	Acceptable
Braiding machine	Not provided	4	1.0	Acceptable
Spiral forming machine	Not provided	8	0.5	Acceptable

Testing Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Air pressure testing machine	Not provided	1	3.0	Acceptable
Hydraulic pressure testing machine	Not provided	2	2.0	Acceptable
Density tester	Not provided	1	1.0	Acceptable
Tensile testing machine	Not provided	1	5.0	Acceptable
Ultrasonic thickness meter	Not provided	1	3.0	Acceptable
Fritting testing machine	Not provided	2	4.0	Acceptable
Material testing equipment	Not provided	1	5.0	Acceptable
Mechanical balance	Not provided	1	5.0	Acceptable

Production Flow: 1.PTFE tube forming 2.Spiral forming 3.Braiding 4.Terminal assembling 5.Air pressure testing 6.Hydraulic pressure testing 7.Drilling 8.Lathing 9.Milling 10.Welding 11.Drawing and flanging 12.Fritting