1.PTFE sheet Flat and tidy surface, no defects, crevices and separations. 2.Low minimum order quantity 3.Good service

skived teflon sheet/plastic sheet ptfe sheet

1. Features of PTFE Skived Sheet:

 PTFE Skived Sheet is manufactured by molding with PTFE granular resin.PTFE is the most chemical resistance of all know plastics.PTFE does not age.it has a wide range of practicable temperature from -180 ~ 260°C.It has the lowest coefficient of friction of all know solid materials.

1).Anti-corrosion in all kinds of chemicals including nitric acid & aqua fortis;

2).High and low temperature resistance(-180 ~ 260°C.).

3).Abrasive resistance.

4).Electric insulation;good dielectric in mediums.

5).Non-aging.

6).It can be used in wide strength range,etc. 

 

2. Use of PTFE Skived Sheet:

 

1).seal, lining and gasket, scrap, guide rail,

 

2).dielectric material for different frequency,

 

3).bridge bearing slide.

 

4).seal liner and lubricant material in kinds of medium, especially corrosive situation;

 

5).dielectric material in kinds of frequency;

 

6).medium materials of capacities;

 

7).insulation material in electrics systems, etc.

3. Specifications of PTFE Skived Sheet:

Project	Unit	Standard
Tensile strength	MPa	≥15.0
Ultimate elongation	%	≥150
Apparent density	g /cm 3	2.1-2.3
Dialectic strength	KV/mm	≥10

 

 

 

 

PTFE Skived Sheet

 

Temp	-180 - +260 °C
mareial	virigin or recycle
Thickness	0.3mm-8mm	Width	≤2000mm

 

4.common size

200mm * 200mm

300mm * 300mm

400mm * 400mm

500mm * 500mm

600mm * 600mm

700mm * 700mm

800mm * 800mm

1000mm * 1000mm

1200mm * 1200mm

Other sizes based on your requirements

Note: Our R&D center can design and develop electronic products according to customers' request!

skived teflon sheet/plastic sheet ptfe sheet