Ads by Google
PETG plate Special plastic PETG copolymer polyester material properties are analyzed as follows: PETG sheet good flame retardant properties. Sheet of the National Fire Protection Material Inspection, reaching a level of flame retardant B1, see the test report. PETG sheet does not belong to the burning body; in line with national standards of building and decoration materials in China. PETG sheet with anti-UV plate performance, this material is the main anti-aging for outdoor applications. PETG co-extruded layer of protection against UV plate greatly enhanced the stability of the products in the long-term outdoor applications. PETG sheet impact strength is 100 times that of tempered glass, is plexiglass 15-20. PETG sheet is very good chemical resistance and can withstand a variety of chemicals, as well as the erosion of commonly used cleaning agents. The heat resistance of PETG is designed according to its application environment and the use of functional requirements. General temperature of the earth's natural temperature low temperature of 40 degrees, 40-41 degrees high temperature, however; value low enough, too much of the function of waste not economic (such as the maximum service temperature of the PC board can reach 250 degrees (short term), long-term service temperature of 180 degrees on the temperature of the natural environment is not really meaningful. PETG sheet in the Earth's high-temperature region (such as India, the highest temperature had reached 41 degrees) the practical application shows that the temperature of the natural environment PETG heat value is designed according to its application conditions and use of state operating temperature within 40 degrees below zero to zero on 60 degrees higher than the actual natural temperature of the insurance factor of nearly 20 degrees, you can rest assured that use. Transmittance is a certain standard, high transmittance and low is not good in conjunction with the internal light source and adjust, such as built-in Philips 40-watt lamp, the light transmittance is generally 35% -40% between the better. PETG sheet light box with light transmission rate according to user requirements, design and production.
PETG plate