BX polyimide film is a black, homogenous opaque film, with some nanometer filler into the resin to be anti-static.

Description:

CEN®BX polyimide film is a black, homogenous opaque film, with some nanometer filler into the resin to be anti-static. So it’s intrinsically conductive, not by coating or dying anti-static fluids.

It remains anti-static even after being baked at temperature 400°C for half an hour.

Characters:

Anti-static homogeneously through the whole film, remaining steady under harsh environment

High-temperature resistance, good radiation resistance

Stable chemical property

Higher thermal conductivity

Halogen-free, environment-friendly, flame-retardant

Matt appearance

Applications:

Anti-static tape for protecting Flexible Flat Cable (FFC)

Replacement for silicon rubber or PTFE as cushioning material during Hot bar,COG,FOG

Protection choice for static sensitive components

Property:

NO.	Item		Typical Value
1	Appearance		After scratch or dissolve in polarity solvent,it keeps black and opaque
2	Type		BX221
3	THK		50±3μm
4	Tensile Strength	MD	≥100Mpa
		TD	≥80Mpa
5	Elongation	MD	≥15%
		TD	≥15%
6	Roll width		520mm
7	Standard Length		800m
8	Transmittance		≤0.1%
9	Surface Resistivity		1.0×104-9Ω
10	Dielectric Strength		≥0.8KV

This is only for your information.For more details,please dial our numbers or send us a message.Thank you.