Ads by Google
Molded PTFE/Teflon Rods
Molded PTFE Rods Features:
1. There are two kinds of PTFE rods to offer.
2. One is manufactured by paste extruding method in the diameter from 4 to 9mm and the other is made by ram extruding method is the diameter from 10mm to 50mm.
3. Over the diameter 50mm are manufactured by moulding.
4. PTFE is the most chemical-resistant of all known plastics.
5. It does not age.
6. PTFE has a wide range of practicable temperature from -180C to +260C and a wax-like surface to which anything hardly sticks.
7. PTFE has the lowest coefficient of friction of all known solid materials.
8. It has the best electrical properties of all plastics.
Molded PTFE Rods Applications:
1. Electrical insulation, seal, antisticking materials.
Molded PTFE Rods Specifications:
Diameter(mm) | Length(mm) | ||
Nominal | Tolerance | Nominal | Tolerance |
4,5,6 | +0.480 | 100 | +5.0 |
7,8,9 | +0.580 | ||
110,120,130140,150 | +2.500 | ||
180,200,250270,300 | +3.00 | 300 | +2.0 |
Molded PTFE Rods Main Properties:
Properties | Unit | Result |
Apparent density | g/cm3 | 2.10—2.30 |
Tensile strength (min) | MPa | 14.0 |
Ultimate elongation (min) | % | 140 |
Note: When the diameter of rod is larger than 16mm.only test Apparent density
Our PTFE Products:
Our Workshop:
Our Market:
Our Service:
1. Your inquiry related to our products or prices will be replied within 24hours
2. Well-trained and experienced staffs to answer all your enquiries in fluent English.
3. All our products have 1-year warranties.
4. Offering the support to solve the problem in the application or selling period.
5. Competitive prices based on same quality;
6. Guarantee samples quality same as mass production quality
PTFE molded rod | molded PTFE rod | PTFE rod | teflon rod