Anyang Ultrahigh Industrial Technical Co., Ltd produces professionally UHMW polythene 3mm sheet.
A. UHMW polythene 3mm sheet description
UHMWPE material has exceptionally low coefficient of friction offering superb sliding properties and is one of the best plastics for wear/abrasion resistance meanwhile tough and impact resistant even at cryogenic temperatures. As a result, it is definite that UHMW polyethylene is a wonderful engineering plastic that can solve many problems that other engineering plastics cannot.
B. Characteristics for UHMW polythene 3mm sheet
1. UHMW exhibits virtually no water absorption
2, Non-Toxic
3. Low coefficient of friction
4. Corrosion resistant
5. Abrasion and impact resistant
6. Wear Resistant
7. Dielectric
8. Weatherproof
C. UHMWPE Application Areas
1. Textile Industry:
2. Chemical Industry:
3. Food Processing Industry:
4. Paper Industry:
5. Material Handling:
6. Farm Implement:
7. Mining & Metals Processing Industries:
8. Transportation:
9. Consumer Products:
10. Waste Water Treatment:
D. A parameter table for UHMWPE
Property | ASTM Test | Units Metric (US) | Typical Values |
Specific Gravity | D792 | gm/cm° | 0.926-0.934 |
Tensile Strength @ Yield | D638 | MPa (PSI) | 21 (3100) |
Tensile Strength @ Break | D638 | MPa (PSI) | 48 (7000) |
Elongation @ Break | D638 | % | 350 |
Young's ("E") Modulus (23°C) | D638 | MPa (PSI 105) | 690 (1.0) |
Young's ("E") Modulus (-269°C) | D638 | MPa (PSI 105) | 2970 (4.3) |
Izod Impact Strength (23°C) | D256(1) | J/m (ft-LBS/in notch) | 140 (30) |
Izod Impact Strength (-40°C) | D256(1) | J/m (ft-LBS/in notch) | 100 (21) |
Hardness, Shore "D" | D2240 | - | 62-66 |
Abrasion Resistance | (2) | - | 100 |
Water Absorption | D570 | % | Nil |
Relative Solution Viscosity | D4020 | dl/gm | 2.3-3.5 |
Density |
| (lbs./cubic in.) | .034 |
UHMW PE Plastic Sheet, UHMW PE Plastic Rod, UHMW PE Plastic Board, UHMW PE Plastic Pad, UHMW PE Plastic Block
Made by: Anyang Ultrahigh Industrial Technical Co., Ltd
3mm sheet
3mm sheet