The product could solve water problem in raw materials.easy to use, improve production efficiency, reduce energy consumption.

Processing Guide:

1. This product will be directly mixed with the plastic raw materials uniformly, which will be used to carry out processing without baking the raw materials;

2. Adding amount is within 1% - 8%, 3% is the generally recommended dosage, which is adjustable according to moisture content of the raw materials.

3. Since the it have a good plasticizing performance and mobile performance, processing temperature can be reduced by 5 % -10 %.

4. The following three steps will be passed when processing: [batching] - [pre-mixing] - [forming]

5. Batching: in accordance with the requirements of plastic parts, choose the batching ratio.

6. Pre-mixing: adding the weighed materials and suitable amount of colorants or master-batch into the mixer, to carry out the simple pre-mixing.

7. Forming: loading the well pre-mixed materials into the plastic jetting-molding machine or the hopper of the extruder, execute injection molding or extrusion.

 8.Accept customed.

Notes:

 

1. This product should be keep out of moisture damp before using;

 

2. The well mixed masterbatch raw materials and plastic must be used up within eight hours, otherwise, the dehydration master-batch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of plugging the filter.

 

3. As for raw materials with large contents of water, the increase of amount is not recommended, because it may reduce the mechanical properties of the products, we recommend appropriate dry treatment;

 

4. It is no allowed to carry out dry treatment to the raw materials together with the plastic dehydration master- batch;

 

5. Before using, check packaging to make sure it is intact or not, unused plastic dehydration master-batch should be heat sealed as soon as possible.

 

 

                                   

 

Desiccant Masterbatch