injection moulding machine 1 Single cylinder injection system 2 Single cylinder injection system 3 Combind pressure holding

injection moulding machine

Feature:

1. Liquid filling type and large diameter hydraulic cylinder, center direct clamping, the template deformation is less than 0.05%. 2. Combind pressure holding system, maitain clamping pressure consistent. 3. Double differential cylinder, symmetric fast moving mold auxiliary mechanism, advanced synchronous mechanism, mold plate running fast and smoothly, maximise the mold open and close speed. 4. Oil free lubrication mold clamping system, machine running fast and smooth, there is no oil leakage on the surface. 5. Large mold thickness, compact overall optimization design, mold open stroke increased, suitable for much longer product. 6. Single cylinder injection system, uniform stress, fast response speed, decreased energy consumption, improving the production stability of precision products. 7. Servo control, double closed loop control, significant effect on energy saving, reduce system heat and decrease the noise.

Equipment :

1. European imported KEBA Computer 2. World famous brand hydraulic components 3. World famous brand main electric components 4. World famous brand seal components

Technical parameters :

CSD-50S-SPCSD-50S-FGCSD-90S-SP    CSD-90S-FGINJECTION UNITSCREW DIAMETERSCREW L/D RATIOSHOTVOLUME(THEORETICAL)SHOT WEIGHTINJECTION PRESSUREINJECTION RATESCREW SPEEDPLASTICIZEING CAPACITYCLAMPING UNITMOLD CLAMP MODECLAMPING FORCEOPENSTROKEMAIXIMUM OPEN DISTANCEMINIMUM MOLD THICKNESSSPACE BETWEEN TIE BARS(WxH)EJECTOR FORCEEJECTOR STROKEEJECTOR NUMBEROTHERSHEATER POWERPUMP MOTOR POWERMAX PUMP PRESSUREHOPPER CAPA CITYOIL TANK CAPACITYMA CHINE WEIGHTMA CHINE DIMENSION(LxWxH)

A	B	A	B
mm	30	32	35	37
L/D	21	19.7	20.8	19.7
cm3	92	103	150	166
g	84	94	137	153
zo	2.9	3.3	4.8	5.4
MPa	200	175	193	173
g/s	53	60	88	100
rpm	0~220		0~220
g/s	12.1	13	12.1	13
	Hydraulic mold clamp		hydraulic mold clamp
KN	500		900
mm	420		480
mm	570		660
mm	150		180
mm	330x330		380×380
KN	25		30
mm	80		100
n	1		5
KW	6		7.1
A	9.2		11
KW	11		15
A	21.3		29.5
Mpa	16		16
cm3	20		25
cm3	300		350
t	3.0		3.8
mxmxm	3.5x1.1x1.5		4.2×1.32×1.68

DIMENSIONSPLATEN DIMENSIONS(FRONT)PLATEN DIMENSIONS(SIDE)MACHINE DIMENSION

mm
mm
mm

CSD-130S-SP     CSD-130S-FGCSD-170S-SP  CSD-170S-FGINJECTION UNITSCREW DIAMETERSCREW L/D RATIOSHOTVOLUME(THEORETICAL)SHOT WEIGHTINJECTION PRESSUREINJECTION RATESCREW SPEEDPLASTICIZEING CAPACITYCLAMPING UNITMOLD CLAMP MODECLAMPING FORCEOPENSTROKEMAIXIMUM OPEN DISTANCEMINIMUM MOLD THICKNESSSPACE BETWEEN TIE BARS(WxH)EJECTOR FORCEEJECTOR STROKEEJECTOR NUMBEROTHERSHEATER POWERPUMP MOTOR POWERMAX PUMP PRESSUREHOPPER CAPA CITYOIL TANK CAPACITYMA CHINE WEIGHTMA CHINE DIMENSION(LxWxH)

A	B	A	B
mm	37	40	40	46
L/D	22.2	20	20.3	20
cm3	206	214	283	374
g	188	219	258	340
zo	6.6	7.8	9.1	12
MPa	196	168	247	188
g/s	117	130	124	157
rpm	0~200		0~200
g/s	12.9	15	13.6	18.6
	hydraulic mold clamp		hydraulic mold clamp
KN	1300		1700
mm	510		660
mm	710		880
mm	200		220
mm	420×420		480×480
KN	40		50
mm	130		180
n	5		5
KW	7.7		9.7
A	13.3		20
KW	18.5		18.5
A	36.4		36.4
Mpa	16		16
cm3	25		25
cm3	400		500
t	4.5		6
mxmxm	4.8×1.4×1.72		5.4×1.5×1.8

DIMENSIONSPLATEN DIMENSIONS(FRONT)PLATEN DIMENSIONS(SIDE)MACHINE DIMENSION

mm
mm
mm

CSD-210S-SP   CSD-210S-FGCSD-250S-SP   CSD-250S-FGINJECTION UNITSCREW DIAMETERSCREW L/D RATIOSHOTVOLUME(THEORETICAL)SHOT WEIGHTINJECTION PRESSUREINJECTION RATESCREW SPEEDPLASTICIZEING CAPACITYCLAMPING UNITMOLD CLAMP MODECLAMPING FORCEOPENSTROKEMAIXIMUM OPEN DISTANCEMINIMUM MOLD THICKNESSSPACE BETWEEN TIE BARS(WxH)EJECTOR FORCEEJECTOR STROKEEJECTOR NUMBEROTHERSHEATER POWERPUMP MOTOR POWERMAX PUMP PRESSUREHOPPER CAPA CITYOIL TANK CAPACITYMA CHINE WEIGHTMA CHINE DIMENSION(LxWxH)

A	B	A	B
mm	50	55	56	62
L/D	22	20	22	20
cm3	471	570	662	812
g	429	518	602	738
zo	16.4	20.1	21.2	26
MPa	200	167	196	160
g/s	210	254	281	335
rpm	0~200		0~200
g/s	24.1	30.8	31.3	37.4
	hydraulic mold clamp		hydraulic mold clamp
KN	2100		2500
mm	720		770
mm	980		1050
mm	260		280
mm	540×540		600×600
KN	60		70
mm	200		200
n	5		9
KW	15		21.7
A	32.8		38.2
KW	22		30
A	43		60
Mpa	16		16
cm3	50		50
cm3	600		700
t	7.2		9.2
mxmxm	5.9×1.6×1.9		6.4×1.8×2.0

DIMENSIONSPLATEN DIMENSIONS(FRONT)PLATEN DIMENSIONS(SIDE)MACHINE DIMENSION

mm
mm
mm

 CSD-300S-FGCSD-300S-SPINJECTION UNITSCREW DIAMETERSCREW L/D RATIOSHOTVOLUME(THEORETICAL)SHOT WEIGHTINJECTION PRESSUREINJECTION RATESCREW SPEEDPLASTICIZEING CAPACITYCLAMPING UNITMOLD CLAMP MODECLAMPING FORCEOPENSTROKEMAIXIMUM OPEN DISTANCEMINIMUM MOLD THICKNESSSPACE BETWEEN TIE BARS(WxH)EJECTOR FORCEEJECTOR STROKEEJECTOR NUMBEROTHERSHEATER POWERPUMP MOTOR POWERMAX PUMP PRESSUREHOPPER CAPA CITYOIL TANK CAPACITYMA CHINE WEIGHTMA CHINE DIMENSION(LxWxH)DIMENSIONSPLATEN DIMENSIONS(FRONT)PLATEN DIMENSIONS(SIDE)MACHINE DIMENSION

A	B	A	B
mm	62	68	60	65
L/D	22	20	22	20
cm3	815	980	382	1035
g	740	890	802	942
zo	26	28.5	28	33.2
MPa	212	176	219	187
g/s	335	368	272	319
rpm	0-200		0-200
g/s	39	41	35.7	40
	hydraulic mold clamp		hydraulic mold clamp
KN	3000		3000
mm	820		820
mm	1170		1170
mm	350		350
mm	690x690		690x690
KN	85		85
mm	230		230
n	13		13
KW	26		26
A	44.5		44.5
KW	37		37
A	63		63
Mpa	16		16
cm3	70		70
cm3	900		900
t	11.3		11.3
mxmxm	7x2x2.3		7x2x2.3
mm
mm
mm

 Flat display:

Workshop & Facilities