The single screw extruderi s used to extrude thermoplastic plastics such as soft or hard polyvinyl,chloride polyethylene

 

This SJ series single screw extruder is used to extrude thermoplastic plastics such as soft or hard polyvinyl chloride and polyethylene. Equipped the corresponding auxiliary machine including moulding head section, it can process various plastic products such as membrane pipe, board and so on, and it also can be used to granulation.    With advantages of advanced design, high yield, good moulding and low energy-consumption, it adopts the drive of involute gear with low noise, steady operation, large bearing capacity and long longevity.Main Technical Parameter

Product Name	Major Axis Ratio	Output	Screw Rotate Speed	Drive Powder	Center Height
SJ-30/25Extruder	25:1	1.5-10kg/h	15-150rpm	5.5kW	1000mm
SJ-45/25Extruder	25:1	5-38kg/h	12-88rpm	7.5kW	1000mm
SJ-65/25Extruder	25:1	20-85kg/h	13-130rpm	22/7.3kW	1000mm
SJ-65/28Extruder	28:1	30-100kg/h	13-130rpm	30kW	1000mm
SJ-65/30Extruder	30:1	50-120kg/h	13-150rpm	37kW	1000mm
SJ-90/25Extruder	25:1	50-100kg/h	33.3-100rpm	55/18.3kW	1000mm
SJ-90/30Extruder	30:1	100-180kg/h	33.3-100rpm	55kW	1000mm
SJ-120/25Extruder	25:1	84-190kg/h	17-52rpm	55kW	1000mm
SJ-120/30Extruder	30:1	200-300kg/h	17-52rpm	75kW	1000mm
SJ-150/25Extruder	25:1	50-300kg/h	7-42rpm	100/75kW	1000mm
SJ-200/25Extruder	25:1	180-430kg/h	5-15rpm	100/16.7kW	1000mm

 

SJ Series Single Screw Plastic Extruder