Ads by Google
One stage blow molding machine
Our company has many years' experience in making innovation to manufacture One stage blow molding machine,injection stretch blow molding machine and moulds developed for creating best quality.
We strive to grow and prosper by adhering to the belief that the customer's concer is our very concern. We not only provide the customer with guarantee in after service but we always pay more attention to effective service to the customer in after-service maintenance. Our persistent pursue is to improve the quality,to create perfect Sanshun brand series plastic molding machine.
The specification of SFF-500 One stage blow molding machine(5 gallon PC jerrycan special packing)
| No | Item | Unit | Data |
| 01 | Screw Diameter | mm | 70-75 |
02 | Theoretical injection capacity | g | 1060-1500 |
| 03 | Blow clamping force | kn | 300 |
| 04 | Injection Clamping Force | kn | 500 |
05 | Suitable Materials | PC.PET | |
06 | Blowing pressure | mpa | 2-3 |
07 | Operating air compressure | mpa | 0.7-0.9 |
08 | Motor Power | kw | 55-75 |
09 | Heater Capacity | kw | 18/4 |
10 | Operating Air Compressure | Mpa | 0.7-0.9 |
11 | Cooling Water | Bar | 1-3 |
| 12 | Dimension Of Machine | cm | 710*230*500 |
13 | Machine Weight(about) | Kg | 13.8 |
Note: We reserve the right to product improvement and perfection,the above parameters changes are subject to change without piror notice.
One step molding machine has the advantage that flexible and high effective four station process. Same time for preform injection and blowing
Because one step molding machine can use the heat which is kept in preform molding process effectively,so total of used power is much lower that two steps molding machine,the freedom of molding is higher,it would be much suitable for special container or other material container accept PET, PC, PP material to produce out high quality bottles.
One stage blow molding machine