Hydraulic hose crimper KM-91H Crimp range: 4mm-51mm Swage force:5300KN Max opening:122mm with quick change tool Hose crimping machine KM-91Hcan swage the hose from 1/4'' to 2'' with 4sp.Used in the engineering plant.

Hydraulic hose crimper KM-91H detail data

Crimp range	1/8" ~2 "  4SP
Standard voltage & motor	380/4kw
Opening without dies	122mm
Opening	±28mm
Swaging force	5300KN
Open	1.5s
Close	8s
Die profile	91 series
Optional voltage&motor	as customer’s requirement
No. of standard die set	10sets
Systematic pressure	31.5Mpa
L*W*H	690mm*465mm*728mm

Advantages:

1. Quick change tool.

 2. Two option control modes:normal and computer.

3.There is the lubrication and dustproof system.

4.With moving holder.

Special:

 1. NEW foam inserts introduced to protect your machine from debris dropping into the bottom of the head. Withthere you will minimize the risk of debris getting intothe cylinder which could cause damage to seals andother moving parts of the head. This will significantly extend the life of hydraulic hose crimping machine.

2. The machine head connect by bolts                                

Result: NO leakage and damage.

hydraulic hose crimper KM-91H