1) hdpe Compression Fittings 2) Size Range:D16-D110. 3) Working Pressure: PN 16 4) Standard:DIN 5) Color:black

Description

•  HDPE Compression Fittings for PE pressure piping applications.

Size range

• From D20 to D110.

Standards

• Dimensions and characteristics according to EN 712/713/715/911; ISO 3501/3503/3458/3459.

• To be installed on PE pipes conforming to ISO 11922; DIN 8072/8074; UNE 53131. Also approved for use with PVC flexible hose (contact us for available sizes).

• Threads (BSP) manufactured according to standard ISO 7; DIN 2999.

• Also available in ASTM/NPT standards.

Working pressure

• 20ºC D20 - D63: PN 16 (threaded fittings: PN 10)

Features

• Used extensively worldwide.

• Tested and approved by the world's premier certification institutes.

• Fast & reliable connections.

• Perfect sealing under all conditions.

• Performance: Approved for use with drinking water.

• Applications: Performance Series: water distribution, irrigation, industry,swimming pools, cable conduits

Installation

Installation d.20-63mm hdpe compression fittings
	1. Cut the pipe square at 90° to the length using a pipe outter.
	2. Insert on the pipe in the following order collar and clinching and place the O-ring on the mouth of the pipe.(fig 2 & 3)
	3. Insert the body of the joint until the gasket is struck in the body itsel.(fig 4)
	4. Insert the body of the joint the gasket has slid inside the body.
	5. Fully tighten the nut. The nut can be tightened manually up to d.32mm, but for larger diameter it is advisable to use a wrench.
Installation d.75-90mm hdpe compression fittings
	1. Cut the pipe square at 90° to the length using a pipe cutter. Lubricate the pipe and the gasket so that the fittings sit correctly on the pipe. Insert the fittings onto the pipe in the following order: ring nut, clinching ring, thrust bushing and put the gasket on the mouth of the pipe.
	2. Push the body of the fitting on the pipe until the gasket is pushed inside the body. (fig.2)
	3.Push the body of the fitting on the pipe until the gasket is struck in the body itself (fig.2)
Installation d.110mm hdpe compression fittings
	1. Cut the pipe square at 90° to the length using a pipe cutter. Lubricate the pipe and the gasket so that the fittings sit correctly on the pipe. Insert the fittings onto the pipe in the following order: ring nut, clinching ring, thrust bushing, gasket and body of the fitting.
	2. Fully tighten the nut until the gasket is stuck inside the body.
	3. Untighten the nut, open the clenching ring and insert it on the pipe, fully tighten the nut using a belt or chain wrench.

Packing Details: