bluetooth interface module sh-06 BLUETOOTH MODULE SH-06 Bluetooth turn serial

 bluetooth interface module sh-06

BLUETOOTH MODULE SH-06  for Bluetooth turn serial

Product Overview SH-06 Bluetooth Serial core modules  This design uses CSR'sBluetooth chips, V2.0 protocol standards, industry-standard28mm x 15 mm x 2.35mm, the volume size of a compact, self-efficienton-board antenna, transparent serial port with a variety ofBluetooth adapter, paired Bluetooth mobile phone use, but also theuse of a pair of master and slave.SH-06  Bluetooth serial module with a backplane, This design isa  SH-06 module, coupled with external circuit based on the floor,the working voltage is from 3.3V to 5V, leads to TTL, and 232,matching the success of the signal LED pin, the host module alsoleads to re-search for new slaves pin (default master and slavememory matching addresses will be down, if the next time there aremultiple simultaneous Bluetooth, the host will automatically findpreviously paired off from the machine, if the high electrical pulseto this pin is to give up memory).The software contains the factory default AT command set, asdetailed in point 6 of the instructions. 2. the circuit interfaceRS232 serial port (TTL level), (also equipped with a floor-levelserial port

Wireless Serial Bluetooth RF Transceiver Module rs232long range rf transceiver modulebluetooth spp module

HC-05

Bluetooth UART RS232 serial Converter Module

+

Free Shipping

 

 

 

Item Name	Bluetooth UART RS232 serial converter Module
Operating Frequency Band	2.4GHz unlicensed ISM band
Bluetooth Specification	V2.0+EDR
Output Power Class	Class 2
Operating Voltage	3.3V
Host Interface	USB/UART
Audio Interface	None
Flash Memory Size	8Mbit
Dimensions	27.2mm x 12.8mm x 2.5mm
Net Weight	9.6 g / 0.3 oz

 Key Features

1. CSR Bluetooth Chip Solution2. Bluetooth Spec v2.0+EDR Compliant3. Enhanced Data Rate (EDR) compliant with V2.0.E.2 of specification for both 2Mbps and 3Mbps modulation modes4. Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support5. Increadible samll size with 3.3V input, and RoHS Compliant6. UART interface and with baudrate setup function7. Support for 8Mbit External Flash Onboard8. Support for 802.11Co-Existence

Datesheet download: http://www.sendspace.com/file/yyu4vy

Product Description

The Bluetooth UART RS232 serial Converter Module can easily transfer the UART data through the wireless Bluetooth, without complex PCB layout or deep knowledge in the Bluetooth software stack, you can combine this bluetooth module with your system: 

* MCU, ARM or DSP systems.* SOC systems.* Personal Digital Assistants (PDAs) * Computer Accessories * Other systems your want to use under bluetooth functions.

[Hardware]

CSR solution, Bluetooth V2.0 protocol

support AT commander

support Master and Slave mode, modify by AT commander

support 1200-115200 baudrate

3.3V single supply

Size: core module: 28mm*15mm*2.35mm, whole module:35.33mm*19.6mm*3.7mm

current: 30mA MAX

can be used with all MCU by UART port

2 indicator lights

[Software]

user manual

AT commander manual

[External Board]

We also provide an external board for the bluetooth to UART module for purchase. 

This small size Bluetooth TTL transceiver module allows your target device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. It's easy to use and completely encapsulated. TTL data transparent transfer between a host Bluetooth device. Works with any USB Bluetooth adapters. Default Baud Rate: 9600,8,1,n. Coverage up to 30ft. Built in antenna. Power input: +3.3VDC. Mini Size:27.2mm x 12.8mm x 2.5mm

bluetooth interface module sh-06