1.Sheet width to cut off from the roll 2.Restricted sheet width 3.Media can be loaded from back or front  CG-75FXIICG-130FXIICG-160FXIIAcceptable sheet widthAcceptable roll sheetEffective cutting area*1Maximum auto cutting width*2Maximum cutting speedMaximum moving speedAdjustable speed range*3Mechanical resolutionCommand resolutionRepeatabilityPen pressureRange of down pressureCutterPouncingPenAcceptable sheet*4Acceptable sheet for pouncing*5Applicable tools*6Type of commandInterfaceReceiver buffer sizeOperationalTemperatureHumidityPower requirementPower consumptionDimensions (WxDxH)Weight (with stands)

90mm~1,040mm (3.54"~40.9")	90mm~1,580mm (3.54"~62.0")	90mm~1,880mm (3.54”~74”)
Outer less than φ200mm , Roll weight less than 18kg		Outer less than φ200mm Roll weight less than 22kg
760mm x 51m(29.9" x 167')	1,300mm x 51m(51.2" x 167')	1,600mm×51m(62.9”×167’)
870mm (34.2”)	1,425mm (56.1”)	1,720mm (67.7”)
100cm/s (39.3"/s)
140cm/s (55"/s)
1-10cm/s : 1cm step adjustment(0.39"-3.94"/s : 0.39" step adjustment)10-50cm/s : 5cm step adjustment(3.94"-19.68"/s : 2" step adjustment)50-100cm/s : 10cm step adjustment(19.68"-39.37" : 3.94" step adjustment)
5µm(0.0002")
25µm or 10µm(0.001" or 0.0004")-MGL-IIc
±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
400g
10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinylReflective sheet
Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
MGL-IIc
RS-232C,USB
30MB Standard (20MB when in sorting)
5~35°C (41~95°F)
35~75%(Rh) Non-condensation
AC100V~240V
130VA or less
1,285mm(50.5")x700mm(27.5")x1,217mm(47.9")	1,825mm(71.8")x700mm(27.5")x1,217mm(47.9")	2,125mm(83.6")x700mm(27.5")x1,217mm(47.9")
50kg(110 lbs.)	60kg(132 lbs.)	69kg(152 lbs.)