curing effects&data provided by world famous paint factories with practise, user can choose the program, curing & distance

Production introduction

Water Paint Blowing and Curing equipment is associative with fan and exceedingly suitable for the drying the water paint. It can be used to dry the gate in small area and fender. It is convenient, economic and fast. The equipment performance is following:

1.       Drying time of the water paint will be shorter. So the holding time of the spray booth will be shorter too.

2.      When small area needs to be repaired, the heat requirement for the spray booth will be less.

3.      Air consumption is lower than 350 L/min (3 bar).

4.      Cover large area. The air-quantity of every blower reaches 6000L/min.

5.      It is with filtering net to reduce the pollution for the paint film.

6.      There are short wave infrared curing lamps on it to dry two groups of paint.

7.      The installation position of the blower can be altered so that the direction of the nozzle can be adjusted to the most suitable place.

8.      Blower, lamps can be connected to the bracket quickly. It is very stable.

9.      The lamp can be moved up and down to adapt to dry different high of workpiece.

10.   The caster with brake makes the equipment stop at the slope steadily.

Technical parameter

Model	GP-521H
Emitter(lamp)	850mm Halogen shortwave infrared lamp,1800W
Working voltage	220V,50/60Hz
Working current	8.5A
Power	1000/1800 W
Area coverage	1000mmX400mm
Heating distance	4050cm
Temperature	6070
Air consumption	350 L/min
Air pressure	33.5bar
MAX air pressure	12bar
Air volume	6000L
Blowing distance	3050cm

water paint& air blowing car curing equipment GP-521H