Ads by Google
Nylon tube,with ISO/TS 16949 certifications. Mdn (amybronte1218#live.cn) Skyoe (amy.m.bronte1218)
Nylon tube,with ISO9001:2000, ISO14001:2004, IS0/TS 16949:2002 certifications.
Material:Nylon 11 & Nylon 12
Semi Flexible, Ideal for Hydraulics, Robotics, Vacuum, Fuel, Vapor, Air, Brake lines
Nylon 11 advantages: Low water absorption for a Nylon ( c. 2.5% at saturation ). Reasonable UV resistance compared to other Nylons. Higher strength and better heat resistance than Nylon 12.
Excellent resistance to corrosion, Chemical resistance to organic acids, salts, alkalis, solvents, hydrocarbons, etc.
Disadvantages: More expensive than Nylon 6 or Nylon 6/6. Low impact strength.
Nylon 12 Advantages: Good retention of mechanical properties following exposure to sunlight/UV radiation. It a weatherable Nylon
Nylon 12 disadvantages: Slightly increased cost and reduced electrical characteristics
Thermal Prop
Nylon 11 Data Sheet | |||
Item | Data | Remark | |
Density | 1 g/cc | 0.0361 lb/in³ |
|
Water Absorption | 1.3 % | 1.3 % |
|
Melt Flow | 15.5 g/10 min | 15.5 g/10 min | 235°C/2.16 kg load |
Tensile Strength,Yield | 18 MPa | 2610 PSI | at 50% Strain; 50 mm/min |
Elongation at Break | Min 50 % | Min 50 % | Nominal Strain; 50 mm/min |
Tensile Modulus | 0.185 GPa | 26.8 ksi | 1 mm/min |
Melting Point | 150 °C | 302 °F | 10°C/min |
Glass Temperature | 15 °C | 59 °F | 10°C/min |
Flammability, UL94 | V-2 | V-2 | V-2 at 3.2 mm thickness |
Nylon 12 Data Sheet | |||
Properties | Test Method | English Units | SI Units |
Physical | |||
Specific Gravity | ASTM D792 | 1.01 | 1.01 |
Water Absorption At 24 hours | ASTM D570 | 0.200 % | 0.200 % |
| |||
Mechanical | |||
Tensile Strength2 | ASTM D638 | 7300 psi | 50.3 MPa (N/mm²) |
Tensile Elongation | |||
@ Yield3 | ASTM D638 | 20 % | 20 % |
@ Break3 | ASTM D638 | 250 % | 250 % |
Flexural Modulus2 | ASTM D790 | 230000 psi | 1590 MPa (N/mm²) |
Flexural Strength2 | ASTM D790 | 8600 psi | 59.3 MPa (N/mm²) |
Impact | |||
Notched Izod Impact | |||
@ 73 °F (23 °C) | ASTM D256 | 1.60 ft-lb/in | 85.4 J/m |
Hardness | |||
Durometer Hardness (D Scale) | ASTM D2240 | 73 | 73 |
Thermal | |||
DTUL | |||
At 264 psi /1.82 MPa- Unannealed | ASTM D648 | 113 °F | 45.0 °C |
At 66 psi/0.45 Mpa - Unannealed | ASTM D648 | 295 °F | 146 °C |
Melting Point | 352 °F | 178 °C | |
inner packing:polybag
outer packing:carton
Mdn (amybronte1218#live.cn)
Skyoe (amy.m.bronte1218)
nylon tube(OEM) for heavy truck