Ads by Google
ST332B ADSL2+ Tester is an ideal tool for
ADSL/ADSL2+ network installation, maintenance
and faults elimination. It is simple, efficient,
reliable and economic. Fixing &maintenance staff’s best choice!
Functions
DSL Physical layer testModem Emulation (Replace the user Modem completely)PPPoE/PPPoA dial DMM TestPing Function (WAN & LAN)Data memory capacity: 50 recordsData upload to computer by RS232 core and software managementSetup system parameter: backlight time, shut off automatically time without operation,press tone, revise PPPoE/PPPoA dial attribute, user name and password, restore factory value and so on.
Check dangerous voltageFour grades service judge(Excellent, Good ,Ok,Poor)Telephone Functions: as the common telephone, call or receiving the telephone call.Specifications
ADSL2+ | |
Standards | ITU G.992.1(G.dmt), ITU G.992.2(G.lite), ITU G.994.1(G.hs), ANSI T1.413 issue #2, ITU G.992.5(ADSL2+)Annex L |
Up channel rate | 0~1.2Mbps |
Down channel rate | 0~24Mbps |
Up/Down attenuation | 0~63.5dB |
Up/Down noise margin | 0~32dB |
Output power | 0~31.5dBm |
Error test | CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode | Available |
Display channel bit map | Available |
ADSL | |
Standards | ITU G.992.1 (G.dmt) ITU G.992.2(G.lite) ITU G.994.1(G.hs) ANSI T1.413 Issue # 2 |
Up channel rate | 0~1Mbps |
Down channel rate | 0~8Mbps |
Up/Down attenuation | 0~63.5dB |
Up/Down noise margin | 0~32dB |
Output power | 0~31.5dBm |
Error test | CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode | Available |
Display channel bit map | Available |
| DMM Test | |
AC Voltage | 0 to 400 V |
DC Voltage | 0 to 290 V |
Capacitance | 0 to 1000nF |
Loop Resistance | 0 to 20KΩ |
Insulation Resistance | 0 to 50MΩ |
General Specification | |
Power supply | Internal Rechargeable 2800mAH Li-ion battery |
Battery Duration | 4 to 5 hours |
Working temperature | 10-50 oC |
Working moisture | 5%-90% |
Dimensions | 180mm×93mm×48mm |
Weight | <0.5kg |