Red flashing beacon
Medium Intensity lights
LED aviation obstacle lamp
Aircraft Warning Light
Aviation Obstruction Lightin
ABC-7M Medium intensity obstruction light for marking towers (Telecom, GSM), smokestacks, buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light. The enclosure of ABC-7M is made of die casting aluminum with powder coated finish, with the advantages of light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Light source consists of external long life LEDs, to ensure maximum life of the product.
Specifications
DescriptionParameter
| Supply voltage | AC110V~AC240V/DC48V/DC24V(other voltage can be customized) |
| Frequency | 50Hz ~ 60Hz |
| Power consumption | 25W(steady) |
| - | Steady burning or flashing mode are available |
| Intensity | 2000±25%cd |
| Horizontal degree | 360° |
| Vertical degree | 3°mnm |
| LED lifetime | ≥80,000 hrs |
| Ambient temperature | -30°C ~ +70°C |
| IP Protection | IP65 |
| Weight | 4.0kg |
| Dimension | 164mm(D) * 239mm(H) |
| Visible distance | 14.5Km (AT=0.85) |
Functions & FeaturesModular design and meets optics standard, compact size and high efficiencyBased on LED technologyExtremely reliable - major maintenance cost savingResistant to shock and vibrationsCorrosion resistant lamp& housingSelf-contained wiring compartment - eliminates additional boxesDesigned to mount onto existing bolt pattern installationsBase material-- die casting aluminum LM6Lamp housing -- polycarbonate, with good anti-impact strength, thermal stability, high transmittanceReflector - ABSCombustibility rating : UL94V0IP protection : IP65Operating temperature : -40°C - +60°C, can withstand the most severe environmentSteady burning or flashing type (no need external controller)Typical LED lifetime : ≥100, 000 hrsUse high power LEDs, and all LEDs are connected in parallel, which are powered by low voltage, constant current; when and if one LED fails, it will not affect other LEDS, to improve the stability and reliability of this product.WiringUnfasten two screws fixed on the nameplate and then remove the nameplate panelInsert the power cable from the gland box and then connect them to the corresponding terminals inside the lamp body(see following figure)Verify whether the power cables are well connected before power onNoticeCheck whether the power cables are connected correctly before power onTemperature rise inside the control box is normal phenomenonPlease do not open any components inside by yourselfThis product is a sealed structure; Should not be tampered with by anyone other than registered installerProduct FileModel: ABC-7MOn Stream Date: Jul. 3, 2008Applications: High building, tower, crane, high chimney, lighthouse, high voltage cable tower, oil well, etc.Standard: MH-T 6012-1999; ICAO Annex 14Certificate: CE certification
Order details:
| Model | Voltage | Work Model | Photocell | Others |
| ABC-7M | AC or DC | Flashing or Steady burning | With photocell or not | |
Please advise us your favor details of the product,we will offer for you ASAP
ABC-7M(ICAO Medium Intensity Light and FAA--L864
