1.New technical Solar inverter 2.High conversion efficiency 3.Multiple protection function 4.Pure sine wave output 5.MPPT

MGI-200W Intelligent Micro On-grid & AC To DC Inverter

System Features:

Integrated balance-of-systems components120/240-volt split-phase operation and true sine wave outputUnsurpassed surge capacity - innovative Full Digital Control regulates voltage to prevent a drop during a power surge. Full 200% rated output power is delivered to the loadEfficient, power factor corrected, high-current, multistage battery chargingEasy and inexpensive to install (does not arrive pre-assembled)Local display on inverter shows output power, charge current and battery level, to provide system status at a glanceDesigned for easy field installation with manageable building blocks

Parameter Table

MGI series models	SY-MGI-200W/230V
Grid inverter working conditions	The electrical utility grid must have current and voltage is 230VAC(190~260VAC)
Recommend use solar panels	18V/240Wp
DC Maximum Input Power	Automatic control
DC maximum voltage	VpvDC28.5VDC
DC voltage range	Vpv 10.8V~28VDC
Maximum input current	Automatic control
AC output power	200W
AC maximum output power	240W
Anti-voltage protection	Fuse
AC standard voltage range	230V(190~260VAC)
AC frequency range	50Hz/60Hz(Automatic detection and adjust)
Output current total  harmonic distortion	THDIAC <3%
Phase shift rate	<1%
Islanding protection	Vac;Fac
Output short circuit protection	Fuse
Show	LED
Standby Power	<2W
Voltage at Pmax	>15.5VDC
Maximum output power factor	98%
DC TO AC Conversion efficiency	>89%
Work temperature range	-25 °C~60°C(skin temperature)
Temperature protection	>75°C(skin temperature)
Humidity	0~99%(Indoor Type Design)
Waterproof	Indoor Type Design
EMC	EN61000-6-3:2007 EN61000-6-1:2007
Grid disturbance	EN 50178+EN 62109-1+VDE0126-1-12
Grid detection	DIN VDE 1026 UL1741
certifications	CE certificate

Notes:       

---Please pay attention of the voltage when use the product. The voltage is from 10.5—28V, if is not these voltage the product may broken.

---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the cable size.

---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear.

---Connected to a power outlet to provide AC

---Connected solar panels, battery or wind generators DC input DC power supply cable.

---Proposed wind power plant with its own charge controller and load dump.

Application for Off Grid Power systems A pure sine wave inverter can be used with off grid solar, home wind turbine or hydro power systems not connected to electric grid. You may find a pure sine inverter with a built-in AC battery charger.Pure sine wave output is best for sensitive electronic equipment such as laser printers, medical devices, and high-end electronic equipment up to 1000 watts.