1,Window and door openings 2,Deck-to-wall intersections 3,Corner boards 4,Wall-to-wall tie-ins

Aluminum Flashing Tape

 

ⅠDESCRIPTION

 

 A cold applied self adhesive aluminium backed flashing in tape form.  

    

COMPOSITION

 

Wall-to-wall tie-ins point polymer bitumen adhesive laminated to a 30-70 micron aluminium. The adhesive surface is protected by a release coated plastics film which is discarded during use.

 

Features

 

 Easy application-Installations fast and easy—simply remove the release film and press onto the substrate.

 

Superior adhesion capabilities-Creates a strong bond to the substrate for long-lasting waterproofing

 

Protection.

 

Excellent sealing performance-The specially formulated rubberized asphalt adhesive seals around fasteners, allowing no water to penetrate and get to the substrate.

 

Highly conformable and flexible-Can accommodate settlement and shrinkage movement.

 

Long-lasting waterproofing protection-Both the aluminum surfaced polyethylene film and pure alu surface with the specially-formulated rubberized asphalt components create a water and moisture barrier that does not degrade from the effects of the environment.

 

 

Technical Datas

PROPERTIES	TYPICAL VALUES	UNIT
Carrier film	Aluminum surfaced HDPE or Pure Aluminum foil
Adhesive	Butyl bituminous
Release liner	Antiadhesive Film Treated with Silicone
Adhesion	30	N/cm
Breaking Strength	40	N/cm
Moisture absorption	0.02	%
Temperature range For application      For maximum service	5 to 50 93	ºC
UV resistance	Excellent	--
Roll of       Thickness	0.8mm,1.0mm,1.2mm,1.27mm,1.4mm,1.5mm,1.65mm,2.0mm
Width	5cm,7.5cm,10cm,15cm,20cm,30cm,40cm,50cm…100cm
Length	50m,20m,15m,10m,5m