Plastic Water Chiller:
Brief Introduction
SML series water-chilling unit is developed from advanced technology home and abroad, it is mainly suitable for cooling plastic mould and injection oil tank, reduce the circulation time through high-speed cooling, to that to improve the work efficiency and plastic product quality. At the same time, it is the essential cooling equipment for hotel, department, film, hospital workshops and the concentrated air-conditioner at the high building.
This series product adopts imported name brand compressor (mainly with French and American Bristol) and independent cooling system composed with several compressors.
This series heat-exchanger adopts sheet, coil heat or tube exchanger, and it is small in shape, high in efficiency.
The equipment is matched with automatic temperature indicator, and it can control the temperature accurately. The unit also adopts such protector as high/ low pressure, water-cut and motor overload etc.
Main Technical Parameters
Model | Unit | 2S | 3S | 4S | 5S | 6S | 7S | 8S | 9S | 10S | 11S | 12S | 13S | ||
Power |
| 380V 3 phase 50HZ | |||||||||||||
Cooling ability | KW | 5.8 | 8.7 | 14.5 | 20 | 21 | 29 | 34 | 43 | 58 | 87 | 116 | 145 | ||
Kcal/h | 5000 | 7500 | 12500 | 17500 | 18750 | 25000 | 30000 | 37500 | 50000 | 75000 | 100000 | 125000 | |||
Compressor | Power | Hp | 2 | 3 | 5 | 7 | 7.5 | 10 | 12 | 15 | 20 | 15×2 | 20×2 | 25×2 | |
Form |
| The inlet is closed | |||||||||||||
Refrigerating medium |
| R22 | |||||||||||||
Ways of precessing |
| On/ off controller | On/ off controller | ||||||||||||
Cooling medium water Cooling water | Evaporator | Plate-type heat exchange or coil heat exchanger | |||||||||||||
The out water temperature | °C | (5-30°C) | |||||||||||||
Freezing Water flux | M3/h | 3.2 | 3.2 | 6.3 | 6.3 | 6.3 | 8 | 13 | 16 | 16 | 18 | 22 | 28 | ||
Connector of out and in-water | In | 3/4 | 1 | 11/4 | 11/4 | 11/4 | 11/2 | 11/2 | 2 | 2 | 11/2 | 3 | 3 | ||
Evaporator | Plate-type heat exchanger or sheet and tube exchanger | ||||||||||||||
The out water temperature | °C | ≤36 | |||||||||||||
Cooled water flux | M3/h | 3 | 4 | 5 | 6 | 7 | 8 | 13 | 15 | 17.5 | 30 | 35 | 40 | ||
Connector of out and in-water | In | 11/2 | 3/4 | 1 | 1 | 1 | 1 | 1 | 11/2 | 11/2 | Flange DN50 | Flange DN65 | |||
Security protector |
| The protector High/lower pressure , stopping flux water, freezing, overload, temperature | |||||||||||||
Weight | kg | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 550 | 600 | 700 | 750 | 800 |
Plastic Water Chiller