1.Backstop freewheel RSBW series is a FDC sprag type freewheel. It is bearing supported, centered plain bearings for low rotational speeds.
2. Unit is delivered grease lubricated ready for installation in either a horizontal or vertical position.
3. Primarily used as a back stop. this type provides a high torque capacity with a minimum space uirement. The design allows installation in difficult environments such as high humidity or water splash areas.
Type
| Size | Weight | ||||||||||
dH7
| TKN Nm | nimax min-1 | D
| L1
| F
| E
| B
| N
| L
| bH11
|
| |
RSBW | 20 | 300 | 400 | 106 | 35 | 113 | 102.5 | 40 | 35 | 15 | 18 | 2.0 |
25 | 485 | 400 | 106 | 48 | 113 | 102.5 | 40 | 35 | 15 | 18 | 2.6 | |
30 | 485 | 400 | 106 | 48 | 113 | 102.5 | 40 | 35 | 15 | 18 | 2.5 | |
35 | 300 | 400 | 106 | 35 | 113 | 102.5 | 40 | 35 | 15 | 18 | 2.0 | |
35 | 485 | 400 | 106 | 48 | 113 | 102.5 | 40 | 35 | 15 | 18 | 2.4 | |
40 | 1,035 | 300 | 132 | 52 | 125 | 115 | 60 | 35 | 15 | 18 | 4.6 | |
45 | 1,035 | 300 | 132 | 52 | 125 | 115 | 60 | 35 | 15 | 18 | 4.5 | |
50 | 1,035 | 300 | 132 | 52 | 125 | 115 | 60 | 35 | 15 | 18 | 4.5 | |
55 | 1,035 | 300 | 132 | 52 | 125 | 115 | 60 | 35 | 15 | 18 | 4.4 | |
60 | 2,040 | 250 | 161 | 54 | 140 | 130 | 70 | 35 | 15 | 18 | 6.5 | |
70 | 2,040 | 250 | 161 | 54 | 140 | 130 | 70 | 35 | 15 | 18 | 6.4 | |
80 | 3,900 | 200 | 190 | 70 | 165 | 150 | 70 | 45 | 20 | 20 | 9.9 | |
90 | 3,900 | 200 | 190 | 70 | 165 | 150 | 70 | 45 | 20 | 20 | 9.8 |
backstop freewheel