1: one machine can use many size scerws. 2.easy to adjust, easy to opeartion. 3.save time of pick up the scews in production.

1.Applicable to several specifications screw with one equipment,

1.0 - 5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), Applicable to special screws, even 1:1 short screws, screws with washers .

2.It is easy to adjust track! The track can be pulled out to adjust freely! Easy to understand and operate! 3.Have not stuck screw condition4.Screws move with the roller and fall at the high position, the screws, which did not enter the track will move into the next cycle. The working speed can be adjusted by adjust the vibration strength ,screw does not shake at the taking point . Feeding and vibration-driven are independent controlled, the stop delay time can be set freely, the equipment will launch failure alarm at non-normal conditions! Operation is as easy as other screw equipment! When you take the screw, you do not have to pay special attention to the position of the screw head, you only need to put the drill tip into the guide, then slide along the guide, the screw will be pulled out. Compared with traditional screws, this equipment can save 1.4 seconds each time, productivity increased by 4 times;5.Easy to operate, even novices can quickly learn how to operate.Don’t need aligning the screw,    just put screws into the hopper;6.Widely applied to many screw types with different length and head shape; Compact, less space. Auto-guide, working with the electrical or wind screwdriver, won't block screw. It is ideal product to replace the traditional products. This mode has counting function , 0-9999 can be set , and launch alarm at the set number.

Screw machine parameters

Screw	For various types of screws including screw with washer (Maximum L = 20MM)
Speed	2 screws/second
Power	AC220V   size 180mm×125mm150mm
Weight	1.5kg
Accessories	Instructions ,allen wrench, DC power supply (input 180-220V ,Output DC 12V)

New Automatic Scerw Spplier