CO2 Laser Main Power Model PS-60 Technical Parameters
Input Voltage | Input Voltage | AC 220V or AC110V | |
AC Frequency | 47 - 440Hz | ||
Cold Surge Current | ≤60A(AC220V input) | ≤30A(AC110V input) | |
Leak Current | ≤0.7mA(AC220V input) | 0.4mA(AC110V input) | |
Output | Max Output Voltage | DC 35KV | |
Max Output Current | DC 23mA | ||
Efficiency | When> 90% load down | ||
Time no-failure | >10000 hours | ||
Response Speed | ≤1ms(the time from output of switch signal to 90%of initial setting current) | ||
Control Port | TTL electricity level switch control, valid electricity has high/low level choices | ||
Voltage-resisting | Input-Output ,input-machine hull: 1500V 10mA 60s AC output cathode and machine hull connection | ||
Protection | Can be used an opening way in a short timerequest the outer shell be good to connect the ground avoid arcing between anode and machine hull connection in the machine | ||
Usage Environment | Work temperature(-10 degrees centigrade to 40 degrees centigrade).Relative humidity≤90% | ||
Cooling Type | The compulsive air cooling | ||
Size | L×W×H= 210×160×95mm |
60W CO2 Laser Main Power