1.bio degradable plastic/resin 2.no need add extra petroleum plastics 3.environment frendly product 4.starch based product

LCD-B 51F

Applications are bags (compost bags, lawn & leaf bags, pet waste bags, trash bags, grocery bags ,carry-out bags, shopping bags etc), agricultural film, consumer and industrial packaging.

Product Properties                                                           

project	testing method	Testing condition	unite	standard
density	ASTM D1505-03	@23 °C	g/cm3	1.05
melt-mass flow rate	ASTM D1238	@190 °C, 2.16kg	g/10 min	1.0-3.0
tensile strength	ASTM D882	500mm/min	MPa	≥12
breaking elongation	ASTM D882	500mm/min	%	≥250
Bio-substance content	ASTM D6866		%	≥5 0
Melting point	ASTM3418		°C	120

Procession Equipment                                                           

 common film blowing machine equipments available

using film extruder rotation screw of L/D  ratio ≥30 : 1(diameter 45mm) , which will help the finished film to achieve best film quality

Procession Technology                                                           

a.      the screw rotation should be slow at first ,and then adjust the screw rotation faster to match the request.

b.      fleshly blown film product feels a little brittle and crisp ,due to dehydration in production ,after 24 hours ,its function regains to normal plastics .

c.       the preferred blow-up ratio is 1:2.5, the height from die of orifice to the nip roll should be higher than 2.5m which to insure full cooling and prevent film blocking.

d.      using blowing temperature for reference

phase	Phase I	Phase II	Phase III	Phase VI	Phase V
Temperature( °C)	125	140	140	145	140

Other Comments                                                                

a.           the film is transparent in off white color , thermal plastic starch have good compatibility with no starch granulation or lines seen in the film .

b.          thermal sealing strength is a good as PE(LDPE)            

nature bio degradable plastic resin granules