1.Heating temperature: 600-1600C 2. Diameter: 8-54mm 3. Length: 240-4000mm 4. Working life more than 8000 hours

SiC heating elements is a kind of non-metal high temperature electric heating element, made of selected super quality green silicon carbide as main materials.

 

Feature of SiC heating elements:

anti-oxidization, anti-corrosion, long service life, little deformation, easy installation and maintance.

 

SiC heating elements can be used in the furnace temperature 600C-1400C, directly in the air use as well, and it need not any protective atmosphere. Because of SiC heating elements well performance, they are widely used in high temperature furnace, ceramics, glass, analysis and test, semiconductor, science research etc.

 

 

Types: GD( straight)\ U-shape\ W-shape\ single spiral\ double spiral\ Slot

 

In case of any inquiry or order, please kindly state diameter, length of hot end as well as the total length and electric resistance, thank you.

 

Rod Specifications and Resistance Range:

 

Diameter (mm)	Length of Hot Zone (mm)	Length of Cold Zone (mm)	Overall Length (mm)	Range of Resistance
8	100-300	60-200	240-700	2.1-7.2
12	100-400	100-350	300-1100	0.8-6.0
14	100-500	150-350	400-1200	0.8-5.6
16	200-600	200-350	600-1300	0.8-4.4
18	200-800	200-400	600-1600	0.7-5.8
20	200-800	250-600	700-2000	0.6-5.0
25	200-1200	250-700	700-2600	0.6-4.5
30	300-2000	250-800	800-3600	0.4-4.0
35	400-2000	250-800	900-3600	0.5-3.4
40	500-2700	250-800	1000-4300	0.5-3.0
45	500-3000	250-750	1000-4500	0.3-2.5
50	600-2500	300-750	1200-4000	0.3-2.5
54	600-2500	300-750	1200-4000	0.3-2.5

 

Notes for using and installing the heater:

1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.

2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.

3. Heater is hard and brittle, please be careful when assem bling and maintaining so as to avoid damage.

4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.

5. When heater is damaged and need to be changed, the resistance of new ne should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.

6. Silicon Carbide (SIC) heating elements is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc.7. Usage: Silicon Carbide (SIC) heating elements can usually make use for furnace which temperature from 600-1600. It can be directly used in an air atmosphere, without any protection atmosphere. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, analysis test, semiconductor, science & research and so on.

Silicon Carbide heating elements (ISO9001)